Duchenne muscular dystrophy (DMD) is an X-linked dystrophin-minus muscle-wasting disease. Ion homeostasis in skeletal muscle fibers underperforms as DMD progresses. But though DMD renders these excitable cells intolerant of exertion, sodium overloaded, depolarized, and spontaneously contractile, they can survive for several decades. We show computationally that underpinning this longevity is a strikingly frugal, robust Pump-Leak/Donnan (P-L/D) ion homeostatic process. Unlike neurons, which operate with a costly “Pump-Leak–dominated” ion homeostatic steady state, skeletal muscle fibers operate with a low-cost “Donnan-dominated” ion homeostatic steady state that combines a large chloride permeability with an exceptionally small sodium permeability. Simultaneously, this combination keeps fiber excitability low and minimizes pump expenditures. As mechanically active, long-lived multinucleate cells, skeletal muscle fibers have evolved to handle overexertion, sarcolemmal tears, ischemic bouts, etc.; the frugality of their Donnan dominated steady state lets them maintain the outsized pump reserves that make them resilient during these inevitable transient emergencies. Here, P-L/D model variants challenged with DMD-type insult/injury (low pump-strength, overstimulation, leaky Nav and cation channels) show how chronic “nonosmotic” sodium overload (observed in DMD patients) develops. Profoundly severe DMD ion homeostatic insult/injury causes spontaneous firing (and, consequently, unwanted excitation–contraction coupling) that elicits cytotoxic swelling. Therefore, boosting operational pump-strength and/or diminishing sodium and cation channel leaks should help extend DMD fiber longevity.
Introduction
Overview
Skeletal muscle (SM) fibers (SMFs) constitute ∼40% of human body mass (Janssen et al., 2000). The sarcolemma of these mechanical, long-lived, multinucleate cells is fortified by dystrophin, a filamentous entropic–spring-like membrane skeleton protein (Campbell and Kahl, 1989; Ibraghimov-Beskrovnaya et al., 1992; Khairallah et al., 2012; Constantin, 2014; Allen et al., 2016; Le et al., 2018). Dystrophin protects against sarcolemmal tearing and bleb damage; with bleb damage, membrane skeleton/bilayer adhesions detach, resulting in fragility and the decay of cell-mediated bilayer organization (Methfessel et al., 1986; Sheetz et al., 2006; Lundbaek et al., 2010; García-Pelagio et al., 2011; Morris, 2012; Ameziane-Le Hir et al., 2014; Dos Santos Morais et al., 2018; Burden et al., 2018). Via linkages within the massive trans-sarcolemma dystrophin–glycoprotein complex, dystrophin also facilitates physiological signaling (Dowling et al., 2021). Healthy SMF capillary beds require dystrophin-expressing endothelial and smooth muscle cells (Verma et al., 2019; Podkalicka et al., 2019). Dystrophin-expressing thymus-derived cells contribute to inflammatory repair of injured muscle (e.g., Farini et al., 2021). Sporadically, damaged SMFs regenerate by fusion with their stem (satellite) cells, a process reliant on satellite cell dystrophin (Dumont et al., 2015; Filippelli and Chang, 2021).
Individuals with the X-linked muscle-wasting disease Duchenne muscular dystrophy (DMD; Fig. 1 A) have no functional dystrophin. Non-ambulatory by their teens, DMD patients can nevertheless survive until SMFs of the respiratory system become nonviable, i.e., for 3 to 4 decades (Landfeldt et al., 2020). With its gene discovered (Hoffman et al., 1987), dystrophin was localized at the sarcolemma (Zubrzycka-Gaarn et al., 1988), and the dystrophin-minus mouse (mdx) was established as a dystrophin-minus mouse model for DMD (Ryder-Cook et al., 1988). DMD remains incurable (Bishop et al., 2018; Datta and Ghosh, 2020; Duan et al., 2021). Though chronic Na+ overload of dystrophic muscles (first documented in 1955) is now noninvasively detectable via 23Na–magnetic resonance imaging (MRI) in young patients (Table 1, items 1, 5, 6, 9, and 10), how SMF ion homeostasis falters in DMD, and if/how this relates to fiber loss, remain unclear.
DMD and impaired SMF ion homeostasis. (A) After infancy in DMD patients, as muscle loading/exertion increases (Duan et al., 2021), primary and secondary effects (top-line and dispersed boxes, respectively) of the dystrophin-minus condition degrade SMF ion homeostasis (Murphy et al., 2019; Gerhalter et al., 2019; Dabaj et al., 2021). A generic excitable SMF ion homeostasis model is used here to probe how DMD deficits (excess Na+ leaks and diminished operational pump strength) would alter SMF ion homeostasis. (B) DMD sarcolemma suffers chemical damage (as per A, from the ↑ROS and ↑[Ca2+]i; Allen et al., 2016) and mechanical bleb damage (García-Pelagio et al., 2011). Nav1.4 channels are among the many membrane proteins whose activities change in damaged membrane (Morris et al., 2006; Wang et al., 2009; Morris, 2012; Morris and Joos, 2016) due to altered bilayer and disrupted protein-partner interactions. (C) As DMD advances, SMF pump reserves (ratio, maximal to steady-state pump activity) diminish due to ↑steady-state Na+ leaks and ↓operational pump strength (see Operational “pump strength” defined). nNOS, neuronal NO synthase; OGD, oxygen-glucose deprivation.
DMD and impaired SMF ion homeostasis. (A) After infancy in DMD patients, as muscle loading/exertion increases (Duan et al., 2021), primary and secondary effects (top-line and dispersed boxes, respectively) of the dystrophin-minus condition degrade SMF ion homeostasis (Murphy et al., 2019; Gerhalter et al., 2019; Dabaj et al., 2021). A generic excitable SMF ion homeostasis model is used here to probe how DMD deficits (excess Na+ leaks and diminished operational pump strength) would alter SMF ion homeostasis. (B) DMD sarcolemma suffers chemical damage (as per A, from the ↑ROS and ↑[Ca2+]i; Allen et al., 2016) and mechanical bleb damage (García-Pelagio et al., 2011). Nav1.4 channels are among the many membrane proteins whose activities change in damaged membrane (Morris et al., 2006; Wang et al., 2009; Morris, 2012; Morris and Joos, 2016) due to altered bilayer and disrupted protein-partner interactions. (C) As DMD advances, SMF pump reserves (ratio, maximal to steady-state pump activity) diminish due to ↑steady-state Na+ leaks and ↓operational pump strength (see Operational “pump strength” defined). nNOS, neuronal NO synthase; OGD, oxygen-glucose deprivation.
Chronic Na+ overload of DMD patient muscles and mdx SMFs
| # . | Reference . | [Na+]i . | Notes . |
|---|---|---|---|
| 1 | Horvath et al., 1955 | [Na+]i higher (and [K+]i lower) in dystrophic than in normal muscle fibers | Horvath et al. (1955) is referenced in Rudman et al. (1972); biopsy, elemental analysis; fibers of 20 patients with unspecified muscular dystrophies. |
| 2 | Dunn et al., 1993 | Diaphragm, gastrocnemius control: 13.0, 13 mdx: 23.5, 24 | Two techniques: Na+ electrode for diaphragm, cyto-volumetrics plus serum and bulk muscle Na+ values for gastrocnemius. Mice. |
| 3 | Hirn et al., 2008 | 1.4× more 22Na+ uptake in mdx than in control | 22Na+ uptake. Tetrodotoxin reduces uptake in both and makes them identical (see their Fig. 1). Mice. |
| 4 | Miles et al., 2011 | Control: 11.5 mM; mdx: 22.5 mM | Na+-dye measurements. Mice. |
| 5 | Weber et al., 2011, 2012 | Total sodium content: volunteers: 25–26 mM; DMD patients: 38 mM | 23Na-MRI. First noninvasive observation of chronic Na+ overload; German DMD patient cohort. Authors wondered if ↑myoplasmic Na+ might signify cytotoxic osmotic Na+ loading…but see 10. |
| 6 | Lehmann-Horn et al., 2012 | Sustained small decrease of cytoplasmic Na+ (and H2O) overload (n = 1) | 23Na-MRI, pilot study, prolonged off-label eplerenone treatment, one 22-yr-old female DMD patient. |
| 7 | Altamirano et al., 2014 | Vastus lateralis control: 8 mM; mdx: 18 mM | Na+ electrodes. Shear-stress stimulation of NO pathway reduced mdx [Na+]i to 10 mM without altering control level (see their Fig. 1 B). Mice. |
| 8 | Burr et al., 2014 | Control: 5.3 mM; mdx: 7.3 mM | Na+ electrodes (see their Fig. 10). Mice. |
| 9 | Glemser et al., 2017 | ∼20% drop in muscle Na+ overload (n = 1) | 23Na-MRI, pilot study, 6 mo off-label eplerenone treatment, one 7-yr-old male DMD patient (see their Table 1). |
| 10 | Gerhalter et al., 2019 | Total sodium content: volunteers: 16.5 mM; DMD patients: 26 mM | 23Na-MRI, French DMD patient cohort. Na+ overload regularly observed in the absence of water T2 increases; this is, therefore, nonosmotic Na+ loading (see also 9). |
| # . | Reference . | [Na+]i . | Notes . |
|---|---|---|---|
| 1 | Horvath et al., 1955 | [Na+]i higher (and [K+]i lower) in dystrophic than in normal muscle fibers | Horvath et al. (1955) is referenced in Rudman et al. (1972); biopsy, elemental analysis; fibers of 20 patients with unspecified muscular dystrophies. |
| 2 | Dunn et al., 1993 | Diaphragm, gastrocnemius control: 13.0, 13 mdx: 23.5, 24 | Two techniques: Na+ electrode for diaphragm, cyto-volumetrics plus serum and bulk muscle Na+ values for gastrocnemius. Mice. |
| 3 | Hirn et al., 2008 | 1.4× more 22Na+ uptake in mdx than in control | 22Na+ uptake. Tetrodotoxin reduces uptake in both and makes them identical (see their Fig. 1). Mice. |
| 4 | Miles et al., 2011 | Control: 11.5 mM; mdx: 22.5 mM | Na+-dye measurements. Mice. |
| 5 | Weber et al., 2011, 2012 | Total sodium content: volunteers: 25–26 mM; DMD patients: 38 mM | 23Na-MRI. First noninvasive observation of chronic Na+ overload; German DMD patient cohort. Authors wondered if ↑myoplasmic Na+ might signify cytotoxic osmotic Na+ loading…but see 10. |
| 6 | Lehmann-Horn et al., 2012 | Sustained small decrease of cytoplasmic Na+ (and H2O) overload (n = 1) | 23Na-MRI, pilot study, prolonged off-label eplerenone treatment, one 22-yr-old female DMD patient. |
| 7 | Altamirano et al., 2014 | Vastus lateralis control: 8 mM; mdx: 18 mM | Na+ electrodes. Shear-stress stimulation of NO pathway reduced mdx [Na+]i to 10 mM without altering control level (see their Fig. 1 B). Mice. |
| 8 | Burr et al., 2014 | Control: 5.3 mM; mdx: 7.3 mM | Na+ electrodes (see their Fig. 10). Mice. |
| 9 | Glemser et al., 2017 | ∼20% drop in muscle Na+ overload (n = 1) | 23Na-MRI, pilot study, 6 mo off-label eplerenone treatment, one 7-yr-old male DMD patient (see their Table 1). |
| 10 | Gerhalter et al., 2019 | Total sodium content: volunteers: 16.5 mM; DMD patients: 26 mM | 23Na-MRI, French DMD patient cohort. Na+ overload regularly observed in the absence of water T2 increases; this is, therefore, nonosmotic Na+ loading (see also 9). |
Ion homeostasis is the autonomous Pump-Leak/Donnan (P-L/D) feedback process (Fig. 2) by which cells, after ionic perturbations, reestablish their “set point” (i.e., steady-state values for membrane potential [Vm] + volume cell model parameter [Volcell] + [ions]i). Fig. 2 A outlines the “P-L and the D-mediated” feedbacks of ion homeostasis. Different cell types’ particular set points are established by evolutionary history. Though concepts depicted in Fig. 2 B are not new, new terms are introduced there to the ion homeostasis lexicon: P-L/D systems, minimal (versus nonminimal) P-L/D steady states, Pump-Leak–dominated steady states, and Donnan-dominated steady states.
P-L/D ion homeostatic feedback processes at steady state. See List of abbreviations. (A) Fundamentals. The ion homeostasis process autonomously returns cells to steady state after ionic perturbations. It uses two sensor/effector feedback mechanisms, one active, one passive. Any cell system’s ion homeostatic set point is its steady state, uniquely defined by the set of variables: Vm, Volcell, and [ion]i(ntracellular) (set point is thus a set-set). Deviations from the set are not what is sensed and responded to. An otherwise blind-to-system values ATP-fueled 3Na+/2K+ pump makes a sensor/effector response by extruding Na+ (and retrieving K+) faster, thereby hyperpolarizing Vm more strongly whenever [Na+]i permeability increases. Simultaneously, the fixed quantity of impermeant cytoplasmic anions, i.e., Donnan effectors, and a Panion (modeled here as PCl) in a PNa- and PK-equipped H2O-permeable membrane, operate as a passive ion homeostatic sensor/effector feedback mechanism, in thrall to thermodynamic/electrostatic constraints. The passive feedbacks, too, operate blind-to-system values, counteracting any osmo-imbalance and any departure from cytoplasmic neutrality. Evolution arbitrates cell-type–appropriate membrane area (Cm), NAi (the impermeant anion quantity), permeability values PK, PNa, PCl, PH2O, pump density, and pump and [Na+]i (also, [K+]e) sensitivity. As Fraser and Huang (2004) explain, a cell’s NAi is the major determinant of its normal size. (B) The always-in-force feedback processes of P-L/D ion homeostasis, sensing a perturbation, immediately begin to reestablish steady state (at which point, net fluxes = 0). Depicted here are two minimal P-L/D steady states, meaning steady states achieved using only the minimal collection of components required (assuming a fixed external milieu) for autonomous return. As depicted, the balanced fluxes at top are Donnan dominated and below are Pump-Leak dominated. Each has three ion-selective permeabilities (PNa, PK, and PCl), an electrogenic (3Na+out/2K+in) [Na+]i-sensitive ATPase pump, a fixed quantity of impermeant cytoplasmic anions (A−i; Donnan effectors; −1 = assumed average valence), and a H2O-permeable membrane area of specified capacitance. ATP ad libitum is assumed. In cells with PCl >> PK >>> PNa (SMFs), steady-state fluxes are Donnan dominated. In cells with PK >> PNa > PCl (neurons), steady-state fluxes are Pump-Leak dominated. At steady-state, Na+-extrusion (INaKpump) matches steady-state Na+ influx (INaleak). Vrest (steady-state Vm) depends on PK:PNa. In minimal systems at steady state, Vrest = ECl. Neurons’ Pump-Leak dominated steady state is nonminimal due to constitutively operating K/Cl cotransporters (compare CN-CD against MN-CD; Table 2). When cotransporters activate in SMFs, they too have nonminimal steady states, but the ultra-basic model here for SMF membrane (SM-CD) has a minimal Donnan dominated P-L/D steady state. In healthy SMFs (and SM-CD), channels underlying excitability (AChRs, Nav, and Kv) are not open at steady state.
P-L/D ion homeostatic feedback processes at steady state. See List of abbreviations. (A) Fundamentals. The ion homeostasis process autonomously returns cells to steady state after ionic perturbations. It uses two sensor/effector feedback mechanisms, one active, one passive. Any cell system’s ion homeostatic set point is its steady state, uniquely defined by the set of variables: Vm, Volcell, and [ion]i(ntracellular) (set point is thus a set-set). Deviations from the set are not what is sensed and responded to. An otherwise blind-to-system values ATP-fueled 3Na+/2K+ pump makes a sensor/effector response by extruding Na+ (and retrieving K+) faster, thereby hyperpolarizing Vm more strongly whenever [Na+]i permeability increases. Simultaneously, the fixed quantity of impermeant cytoplasmic anions, i.e., Donnan effectors, and a Panion (modeled here as PCl) in a PNa- and PK-equipped H2O-permeable membrane, operate as a passive ion homeostatic sensor/effector feedback mechanism, in thrall to thermodynamic/electrostatic constraints. The passive feedbacks, too, operate blind-to-system values, counteracting any osmo-imbalance and any departure from cytoplasmic neutrality. Evolution arbitrates cell-type–appropriate membrane area (Cm), NAi (the impermeant anion quantity), permeability values PK, PNa, PCl, PH2O, pump density, and pump and [Na+]i (also, [K+]e) sensitivity. As Fraser and Huang (2004) explain, a cell’s NAi is the major determinant of its normal size. (B) The always-in-force feedback processes of P-L/D ion homeostasis, sensing a perturbation, immediately begin to reestablish steady state (at which point, net fluxes = 0). Depicted here are two minimal P-L/D steady states, meaning steady states achieved using only the minimal collection of components required (assuming a fixed external milieu) for autonomous return. As depicted, the balanced fluxes at top are Donnan dominated and below are Pump-Leak dominated. Each has three ion-selective permeabilities (PNa, PK, and PCl), an electrogenic (3Na+out/2K+in) [Na+]i-sensitive ATPase pump, a fixed quantity of impermeant cytoplasmic anions (A−i; Donnan effectors; −1 = assumed average valence), and a H2O-permeable membrane area of specified capacitance. ATP ad libitum is assumed. In cells with PCl >> PK >>> PNa (SMFs), steady-state fluxes are Donnan dominated. In cells with PK >> PNa > PCl (neurons), steady-state fluxes are Pump-Leak dominated. At steady-state, Na+-extrusion (INaKpump) matches steady-state Na+ influx (INaleak). Vrest (steady-state Vm) depends on PK:PNa. In minimal systems at steady state, Vrest = ECl. Neurons’ Pump-Leak dominated steady state is nonminimal due to constitutively operating K/Cl cotransporters (compare CN-CD against MN-CD; Table 2). When cotransporters activate in SMFs, they too have nonminimal steady states, but the ultra-basic model here for SMF membrane (SM-CD) has a minimal Donnan dominated P-L/D steady state. In healthy SMFs (and SM-CD), channels underlying excitability (AChRs, Nav, and Kv) are not open at steady state.
The charge difference (CD) approach for P-L/D ion homeostasis modeling is rigorous and powerful (Fraser and Huang, 2004, 2007; Fraser et al., 2011; Cha and Noma, 2012; Hübel et al., 2014; Dijkstra et al., 2016; Kay, 2017; Dmitriev et al., 2019) but has not yet been used to address DMD-afflicted fibers, which, in spite of an encyclopedic list of deficits (e.g., Murphy et al., 2019; Dowling et al., 2021), can nevertheless survive decades. Here, via CD-modeling, we therefore ask not only what is wrong with DMD ion homeostasis but also what is right. Globally, we conclude, what is wrong relates to Pump-Leak malfunctions, while what is right relates to SMFs’ ion homeostatic strategy, which, unlike that of neurons, is built around an ultra–energy-efficient and thence physiologically robust Donnan dominated (i.e., based on [big PCl][small INaleak]) steady-state. Cytoplasmic Donnan effectors are a source of electro-osmotic free energy; as membrane-impermeant ions, they passively influence the transmembrane distribution of membrane-permeant ions and of H2O (Fig. 2, A and B). Neurons are high-input–impedance, electrically agile, high-excitability cells with [small PCl][big INaleak] steady states; when pumping falters, neurons’ [big INaleak] and resultant small pump reserves quickly eventuate in treacherous Donnan-effector–mediated swelling (= lethal Na+ + Cl− + H2O influxes). SMFs, too, are excitable, but they spend most of their time at their hyperpolarized steady states. SMF resilience against profound physiological insult starts from the collaboration of [big PCl] with Donnan effectors, a pairing that exploits the no-added-cost free energy of Donnan effectors to keep SMFs difficult to excite. Meanwhile, [small INaleak] ensures hyperpolarized resting potential (Vrest) values, slow rundowns when pump strength falters, and the large resilience-conferring pump reserves that ensure SMFs can handle intermittent peak demands.
Operational “pump strength” defined
Ion homeostatic pump strength here is an operational term, given as percentage of normal (100%) maximal pump strength. Pump-strength units are attomol/s (amol/s; 10−18 mol/s) ATP consumed or, equivalently, pA of INaKpump (see Materials and methods). Facilitating intermodel comparisons, for all P-L/D models here, maximal (100%) pump strength = 566 amol/s of ATP consumption (i.e., 54.5 pA of INaKpump for ImaxNaKpump) and pump kinetic parameters are identical. A P-L/D system’s operational pump strength would, then, depend, in vivo, on (1) the quantity of pump proteins (an expression issue), (2) the functionality of membrane-resident pumps (a “machinery” issue), and (3) the supply issue of ATP availability (i.e., [oxygen-glucose→→→ATP]). Thus (hormonal) up-regulation would give pump strengths >100% whereas (e.g.) tourniquet application, chronic or episodic ischemia, malfunctioning pumps, ouabain, vascular deterioration, etc., would give pump strengths <100%. As DMD progressed, cumulative defects of the dystrophin-minus condition (Fig. 1, A–C) would diminish pump strength, thus defined.
Reduced pump strength and elevated Na+ leaks in DMD
The mitochondrial damage of DMD is first a pump-strength supply issue, and second, from reactive oxygen species (ROS) and Ca2+ damage to pump-bearing sarcolemma, a machinery issue (Whitehead et al., 2010; Timpani et al., 2015; Moore et al., 2020; Dubinin et al., 2020; Ramos et al., 2020; Capitanio et al., 2020). A further supply issue is inadequate DMD vasculature (Dietz et al., 2020). Because of early reports of above-normal Na+/K+-adenosine triphosphatase (ATPase) protein levels in mdx SMFs (Anderson 1991; Dunn et al., 1995), pump expression was not considered problematic. New work shows otherwise. Kravtsova et al. (2020) find, for 3Na+/2K+ATPase isozymes in mdx respiratory (diaphragm) and postural (soleus) muscles, reduced protein (and mRNA) levels, depolarized Vrest values, and diminished ouabain depolarization. Moreover, given the sensitivity of Na+/K+-ATPases to bilayer lipids (Cornelius et al., 2015; Habeck et al., 2017; Petrov et al., 2017; Hossain and Clarke, 2019; Else, 2020), the pathologically redistributed diaphragm endplate cholesterol Kravtsova et al. (2020) observe likely further diminish pump strength as a machinery issue. Pediatric DMD patients’ dyslipidemia worsens with age, while deep remodeling of energy metabolism occurs in DMD SMFs (this includes reduced SMF ATP, a supply issue) and changes in multiple membrane-forming lipids (Anderson, 1991; White et al., 2020; Dabaj et al., 2021). These deficits are consistent with sarcolemmal damage of DMD due to mechanical and oxidative (Ca2+/ROS) stress (Petrof et al., 1993; Dudley et al., 2006; Allen et al., 2016; Murphy et al., 2019).
Acutely, during exertion, healthy SMFs locally bolster their vascular supply: a nitric oxide (NO) synthetase (NOS) linked via dystrophin to the dystrophin–glycoprotein complex activates, producing NO to vasodilate capillaries. In dystrophin-minus fibers, this feedback fails (Sander et al., 2000; Asai et al., 2007). The result is functional ischemia. This is exacerbated by DMD muscles’ degenerated vascularization (Dudley et al., 2006; Thomas, 2013; Bosco et al., 2021). Compounding these supply issues, longer-term, oxidative stress (Ca2+, ROS) from functional ischemia causes membrane damage, a machinery issue.
On the Na+-leak side, perturbed gating in bleb-damaged mdx sarcolemma could explain overactive voltage-gated sodium channel (Nav) 1.4 channels and overactive (unidentified) cation channels (Methfessel et al., 1986; Morris and Horn, 1991; Wan et al., 1999; Morris, 2012, 2018; Morris and Joos, 2016; Hirn et al., 2008; Lansman, 2015).
The capacity for sarcolemmal repair is retained
Stretch injury can leave mdx fibers depolarized and inexcitable for days but is not inherently lethal (Anderson, 1991; Call et al., 2013; Pratt et al., 2015; Baumann et al., 2020). In spite of their heightened susceptibility to rupture, microtears, and bleb damage (Menke and Jockusch, 1991, 1995; Petrof et al., 1993; Williams and Bloch, 1999; García-Pelagio et al., 2011; Hernández-Ochoa et al., 2015; Houang et al., 2018; Fig. 1 B), DMD fibers, like healthy SMFs, can repair sarcolemma tears. Ca2+-mediated exocytosis seals the tear; endocytosis then retrieves excess bilayer, though mdx-fibers’ impaired autophagy impedes subsequent reprocessing (McNeil and Steinhardt, 2003; Corrotte et al., 2013; Andrews et al., 2014; Barthélémy et al., 2018; Stoughton et al., 2018; Call and Nichenko, 2020).
Na+ overload: Though rapidly lethal in injured neurons, chronically tolerated in DMD SMFs
Na+ overload of ischemically injured central neurons rapidly elicits treacherous osmotic swelling (Hübel et al., 2014; Dreier et al., 2018). In cortical neurons (CNs), this accelerates lethally when normally cryptic Cl− channels activate (Rungta et al., 2015). Dijkstra et al. (2016) explained this cerebral ischemia scenario using a neuronal P-L/D ion homeostasis model, here termed CN-CD.
23Na-proton-MRI measurements from leg muscles of preteen boys with DMD show a chronic Na+ overload that has been shown to be “nonosmotic,” i.e., not accompanied by water uptake (Table 1, items 5, 6, and 10; Weber et al., 2011, 2012; Gerhalter et al., 2019). This presents a seeming conundrum because, like their healthy counterparts, DMD-afflicted SMFs have an exceptionally large resting PCl (chloride permeability), or “[big PCl],” ∼80% of which is due to ClC-1 channels (Cozzoli et al., 2014; Pedersen et al., 2016; Jentsch and Pusch 2018). CNs’ “[small PCl]” helps minimize swelling during normal brief Na+ loads but is inadequate during sustained ischemia-induced Na+ loading. Then, for well-understood reasons, once the abnormal PCl component joins in, the neurons succumb even faster to cytotoxic [Na+ + Cl− + H2O] (osmotic) influxes or “death-by-Donnan effect.” How, then, do [big PCl] DMD fibers, with their low pump strength, chronically sustain nonosmotic Na+ overloads? Though PK values differ nontrivially in neurons and SMF, the explanation does not lie there. Modeling here will show those differences to be constrained by far more critical neuron/SMF differences in PNa and PCl values.
Neurons, to support their easy-to-excite electrically agile electrophysiological lifestyle, evolved a costly Pump-Leak–dominated ([small PCl][big INaleak]) strategy for ion homeostatic steady state. SMFs, cells that spend most of their time at steady state, where they need to remain difficult-to-excite, rely on a different strategy ([big PCl][small INaleak]).
A useful P-L/D model for excitable SMFs, one that can resolve the neuron/SMF “PCl conundrum,” should explain healthy SMF ion homeostasis while clarifying how DMD-afflicted, Na+-overloaded SMFs avoid osmotic swelling. The model used here does so. It shows how SMFs’ [big PCl]/(Donnan effector) collaboration physiologically exploits free energy embodied in impermeant myoplasmic anions to deeply stabilize, for no added cost, their Pump-Leak–determined steady state. This strategy keeps SMF excitability low and extraordinarily safe from osmotic swelling, provided they maintain the [small INaleak]. Modeling likewise shows how the Donnan dominated (i.e., [big PCl][small INaleak]) SMF ion homeostatic steady state would eventually fail, as severe (late-stage) DMD damage rendered INaleak too big and global SMF pump strength too small.
Comparative CD modeling to address DMD
To probe healthy SMF volume regulation, Fraser and Huang (2004) established the biophysically rigorous CD approach to ion homeostasis modeling (Fraser and Huang, 2007; Kay, 2017; Dmitriev et al., 2019) used here. Unlike earlier approaches, it explicitly incorporates the thermodynamic feedbacks (constraints) imposed by cytoplasmic Donnan effectors (Fig. 2 A). That first Fraser and Huang (2004) P-L/D model (like models here) is 0-D, meaning that flux properties are spatially invariant. It is, however, nonexcitable. A later model addressing action potential (AP) propagation in K+-accumulating t-tubules adds spatial complexity and excitability (Fraser et al., 2011; see T-tubules in the supplemental text at the end of the PDF), but is unsuited for addressing the resilience of SMF ion homeostasis in the face of DMD.
For that purpose, we use parallel (i.e., comparative) P-L/D modeling. SM-CD is our as-basic-as-possible P-L/D model for a slice of generic excitable SMF; as per Fig. 3 A–C and Table 2 (see List of abbreviations), it parallels the extant model, CN-CD (Dijkstra et al., 2016). SM-CD has SMF-appropriate resting permeabilities and excitability, but matches CN-CD for membrane area, maximal (100%) pump strength, and steady-state volume. Parallel models make intersystem comparisons of (1) steady-state values and (2) post-perturbation trajectories biophysically meaningful. SM-CD has a minimal steady state, but CN-CD (with its neuronally important K/Cl cotransporter) has a nonminimal steady state. In all models, INaKpump (i.e., hyperpolarizing Na+ extrusion from 3Na+out/2K+in) is the direct electrophysiological consequence of ion homeostatic ATP consumption. For SM-CD, steady state is Donnan dominated; to quantitatively clarify the benefits of that steady state, an additional parallel model, weak Donnan (WD)–CD is devised: it is a counterfactual SM-CD analog with a Pump-Leak–dominated steady state.
Model building. (A) CN-CD→SM-CD. SM-CD was devised by modifying CN-CD (specifics in Materials and methods, Table 2, and List of abbreviations). CN-CD assumes a round cell with excess SA. Though Dijkstra et al. (2016) compute X-sectional area (relevant to confocally imaged neurons in brain slice; Rungta et al., 2015), we recalculate CN-CD for Volcell. (B–D) SA/Vol: from CN-CD via SM-CD to SMFs. When extrapolating from SM-CD to myofibers, SA/Vol will impact P-L/D efficiency and time courses (see text). Thus, two steps, B, i and ii, and C, i and ii, show how one ion homeostatic unit (with its given excess SA) would be disposed for mononuclear CN-CD versus multinuclear SMFs. In SMFs, one SM-CD unit would be one of many for a cylindrical syncytial myofiber. Enclosed versus encircled is not computationally relevant here (P-L/D models here are 0-D, not 3-D), but topology matters for extrapolating to actual myofibers, as in D, i, where, for cylindrical geometry, 2,000 µm2 of sarcolemma disposed as a ring (no excess SA) would encircle far more Volcell than 2,000 µm3 (Volcell depending on slice width); e.g., the 10-µm slice (D, ii) would enclose ∼32,000 µm3 of myoplasm (SA/Vol ratio: ∼0.125/µm, compared with 1/µm for C, ii). Linear, area, and volume dimension units here: µm, µm2, and µm3, respectively. Schematics not to scale (for reference [using their SA/Vol units], Fraser and Huang (2004) modeled a 75-µm-diameter fiber with SA/Volcell = 5 × 105 cm2/liter; the D, ii, slice has SA/Volcell = 6 × 105 cm2/liter, and SM-CD [as per C, ii] SA/Volcell = 25 × 105 cm2/liter). See also T-tubules in the supplemental text.
Model building. (A) CN-CD→SM-CD. SM-CD was devised by modifying CN-CD (specifics in Materials and methods, Table 2, and List of abbreviations). CN-CD assumes a round cell with excess SA. Though Dijkstra et al. (2016) compute X-sectional area (relevant to confocally imaged neurons in brain slice; Rungta et al., 2015), we recalculate CN-CD for Volcell. (B–D) SA/Vol: from CN-CD via SM-CD to SMFs. When extrapolating from SM-CD to myofibers, SA/Vol will impact P-L/D efficiency and time courses (see text). Thus, two steps, B, i and ii, and C, i and ii, show how one ion homeostatic unit (with its given excess SA) would be disposed for mononuclear CN-CD versus multinuclear SMFs. In SMFs, one SM-CD unit would be one of many for a cylindrical syncytial myofiber. Enclosed versus encircled is not computationally relevant here (P-L/D models here are 0-D, not 3-D), but topology matters for extrapolating to actual myofibers, as in D, i, where, for cylindrical geometry, 2,000 µm2 of sarcolemma disposed as a ring (no excess SA) would encircle far more Volcell than 2,000 µm3 (Volcell depending on slice width); e.g., the 10-µm slice (D, ii) would enclose ∼32,000 µm3 of myoplasm (SA/Vol ratio: ∼0.125/µm, compared with 1/µm for C, ii). Linear, area, and volume dimension units here: µm, µm2, and µm3, respectively. Schematics not to scale (for reference [using their SA/Vol units], Fraser and Huang (2004) modeled a 75-µm-diameter fiber with SA/Volcell = 5 × 105 cm2/liter; the D, ii, slice has SA/Volcell = 6 × 105 cm2/liter, and SM-CD [as per C, ii] SA/Volcell = 25 × 105 cm2/liter). See also T-tubules in the supplemental text.
Parameter values for CN-CD and SM-CD models and variants
| . | Excitable P-L/D charge difference (CD) model . | |||||
|---|---|---|---|---|---|---|
| . | Notes . | CN-CD . | MN-CD . | SM-CD . | WD-CD . | LA-CD . |
| Parameter | Nature of model’s steady state →→ | P-L domin’d st-st nonminimal (neuron) | P-L domin’d st-st / minimal (no co-transporter) | Donnan domin’d st-st / minimal (healthy SMF) | P-L domin’d st-st / minimal (counterfactual) | Donnan domin’d st-st / minimal (DMD-like) |
| Cm | 20 pF | 20 pF | 20 pF | 20 pF | 20 pF | |
| SA (from Cm) | (0.01 pF/µm2) | 2,000 µm2 | 2,000 µm2 | 2,000 µm2 | 2,000 µm2 | 2,000 µm2 |
| PNa | 2 µm3/s | 2 µm3/s | 0.3 µm3/s | 1.06 µm3/s | 0.3 µm3/s | |
| PK | 20 µm3/s | 20 µm3/s | 10 µm3/s | 36.7 µm3/s | 10 µm3/s | |
| PCl | 2.5 µm3/s | 2.5 µm3/s | 30 µm3/s | 2.5 µm3/s | 30 µm3/s | |
| PNa:PK:PCl | PionX ratios | 0.1:1:0.125 | 0.1:1:0.125 | 0.03:1:3 | 0.03:1:0.07 | 0.03:1:3 |
| Impedance−1 | (Summed PionX) | 24.5 µm3/s | 22.5 µm3/s | 40.3 µm3/s | 40.3 µm3/s | 40.3 µm3/s |
| PH2O | 2 µm3/(s Pa) | 2 µm3/(s Pa) | 2 µm3/(s Pa) | 2 µm3/(s Pa) | 2 µm3/(s Pa) | |
| NAi | 296 fmol | 296 fmol | 299.2 fmol | 299.2 fmol | 298.4 fmol | |
| Pump as ATPase | Max ATP/s or 100% | 566 amol/s | 566 amol/s | 566 amol/s | 566 amol/s | 170 amol/s |
| ImaxNaKpump | Max INaKpump | 54.5 pA | 54.5 pA | 54.5 pA | 54.5 pA | 16.35 pA |
| Max PNav | Like H-H gmax | 800 µm3/s | 800 µm3/s | 2,400 µm3/s | 2,400 m3/s | 2,400 µm3/s |
| Max PKv | Like H-H gmax | 400 µm3/s | 400 µm3/s | 1,200 µm3/s | 1,200 m3/s | 1,200 µm3/s |
| UKCl | (Strength) | 1.3 (fmol/s)/(J/Coul) | 0 | 0 | 0 | 0 |
| Max PClv | (Pathological) | 19.5 µm3/s | 19.5 µm3/s | 0 | 0 | 0 |
| Electrolytes (mM): extracellular [fixed] and intracellular (calculated at steady state) | ||||||
| [Sol]e, i | Total solutes | [310] & (310) | [310] & (310) | [310] & (310) | [310] & (310) | [310] & (310) |
| [Na+]e, i | Sodium | [152] & (10) | [152] & (9.8) | [152] & (3.7) | [152] & (6.8) | [152] & (6.5) |
| [K+]e, i | Potassium | [3] & (145) | [3] & (145.2) | [3] & (151.3) | [3] & (148.2) | [3] & (148.5) |
| [Cl−]e, i | Chloride | [135] & (7) | [135] & (12.2) | [135] & (5.4) | [135] & (5.4) | [135] & (5.5) |
| [A−]e, i | Impermeant | [20] & (148) | [20] & (142.8) | [20] & (149.6) | [20] & (149.6) | [20] & (149.5) |
| Calculated steady-state (resting-state) values of P-L/D systems with above values | ||||||
| Volcell | (Volume) | 2,000 µm3 | 2,072 µm3 | 2,000 µm3 | 2,000 µm3 | 2,000 µm3 |
| Vm | (Vrest) | −65.5 mV | −64.3 mV | −86.0 mV | −86.0 mV | −85.6 mV |
| [Sol]i | [Solutes]cytoplasm | 310 mM | 310 mM | 310 mM | 310 mM | 310 mM |
| ENa | (Nernst pot’l) | 72.6 mV | 73.1 mV | 99.2 mV | 82.9 mV | 84.0 mV |
| EK | (Nernst pot’l) | −103.6 mV | −103.6 mV | −104.7 mV | −104.2 mV | −104.2 mV |
| ECl | (Nernst pot’l) | −79.0 mV | −64.3 mV | −86.0 mV | −86.0 mV | −85.6 mV |
| INaleak (st-st) | (Through PNa) | −78.2 pA | −77.1 pA | −14.75 pA | −52.1 pA | −14.66 pA |
| INav (st-st) | (Through PNav) | −0.07 pA | −0.14 pA | −2.3 × 10−7 pA | −2.4 × 10−7 pA | −3.3 × 10−7 pA |
| m | (H-H) | 0.013 | 0.013 | 0.000 | 0.000 | 0.000 |
| h | (H-H) | 0.987 | 0.987 | 1.000 | 1.000 | 1.0000 |
| m3h | (H-H) | 2.2 × 10−6 | 2.2 × 10−6 | 1.75 × 10−12 | 2.0 × 10−12 | 2.8 × 10−12 |
| n | (H-H) | 0.003 | 0.003 | 0.000 | 4.8 × 10−5 | 5.3 × 10−5 |
| ATP/s (st-st) | Consumption | 270.9 amol/s | 267.3 amol/s | 51.0 amol/s | 180.4 amol/s | 50.7 amol/s |
| Pump reserve | Max ATP/s /consumption | 2.1-fold | 2.12-fold | 11.1-fold | 3.1-fold | 3.4-fold |
| Miscellaneous | ||||||
| VolcellDonnanEq | (Notional) | 14,000 µm3 | 14,000 µm3 | 14,960 µm3 | 14,961 µm3 | 14, 952 µm3 |
| Volcellrupture | (Bilayer limit) | 8,920 µm3 | 8,920 µm3 | 8,920 µm3 | 8,920 µm3 | 8,920 µm3 |
| . | Excitable P-L/D charge difference (CD) model . | |||||
|---|---|---|---|---|---|---|
| . | Notes . | CN-CD . | MN-CD . | SM-CD . | WD-CD . | LA-CD . |
| Parameter | Nature of model’s steady state →→ | P-L domin’d st-st nonminimal (neuron) | P-L domin’d st-st / minimal (no co-transporter) | Donnan domin’d st-st / minimal (healthy SMF) | P-L domin’d st-st / minimal (counterfactual) | Donnan domin’d st-st / minimal (DMD-like) |
| Cm | 20 pF | 20 pF | 20 pF | 20 pF | 20 pF | |
| SA (from Cm) | (0.01 pF/µm2) | 2,000 µm2 | 2,000 µm2 | 2,000 µm2 | 2,000 µm2 | 2,000 µm2 |
| PNa | 2 µm3/s | 2 µm3/s | 0.3 µm3/s | 1.06 µm3/s | 0.3 µm3/s | |
| PK | 20 µm3/s | 20 µm3/s | 10 µm3/s | 36.7 µm3/s | 10 µm3/s | |
| PCl | 2.5 µm3/s | 2.5 µm3/s | 30 µm3/s | 2.5 µm3/s | 30 µm3/s | |
| PNa:PK:PCl | PionX ratios | 0.1:1:0.125 | 0.1:1:0.125 | 0.03:1:3 | 0.03:1:0.07 | 0.03:1:3 |
| Impedance−1 | (Summed PionX) | 24.5 µm3/s | 22.5 µm3/s | 40.3 µm3/s | 40.3 µm3/s | 40.3 µm3/s |
| PH2O | 2 µm3/(s Pa) | 2 µm3/(s Pa) | 2 µm3/(s Pa) | 2 µm3/(s Pa) | 2 µm3/(s Pa) | |
| NAi | 296 fmol | 296 fmol | 299.2 fmol | 299.2 fmol | 298.4 fmol | |
| Pump as ATPase | Max ATP/s or 100% | 566 amol/s | 566 amol/s | 566 amol/s | 566 amol/s | 170 amol/s |
| ImaxNaKpump | Max INaKpump | 54.5 pA | 54.5 pA | 54.5 pA | 54.5 pA | 16.35 pA |
| Max PNav | Like H-H gmax | 800 µm3/s | 800 µm3/s | 2,400 µm3/s | 2,400 m3/s | 2,400 µm3/s |
| Max PKv | Like H-H gmax | 400 µm3/s | 400 µm3/s | 1,200 µm3/s | 1,200 m3/s | 1,200 µm3/s |
| UKCl | (Strength) | 1.3 (fmol/s)/(J/Coul) | 0 | 0 | 0 | 0 |
| Max PClv | (Pathological) | 19.5 µm3/s | 19.5 µm3/s | 0 | 0 | 0 |
| Electrolytes (mM): extracellular [fixed] and intracellular (calculated at steady state) | ||||||
| [Sol]e, i | Total solutes | [310] & (310) | [310] & (310) | [310] & (310) | [310] & (310) | [310] & (310) |
| [Na+]e, i | Sodium | [152] & (10) | [152] & (9.8) | [152] & (3.7) | [152] & (6.8) | [152] & (6.5) |
| [K+]e, i | Potassium | [3] & (145) | [3] & (145.2) | [3] & (151.3) | [3] & (148.2) | [3] & (148.5) |
| [Cl−]e, i | Chloride | [135] & (7) | [135] & (12.2) | [135] & (5.4) | [135] & (5.4) | [135] & (5.5) |
| [A−]e, i | Impermeant | [20] & (148) | [20] & (142.8) | [20] & (149.6) | [20] & (149.6) | [20] & (149.5) |
| Calculated steady-state (resting-state) values of P-L/D systems with above values | ||||||
| Volcell | (Volume) | 2,000 µm3 | 2,072 µm3 | 2,000 µm3 | 2,000 µm3 | 2,000 µm3 |
| Vm | (Vrest) | −65.5 mV | −64.3 mV | −86.0 mV | −86.0 mV | −85.6 mV |
| [Sol]i | [Solutes]cytoplasm | 310 mM | 310 mM | 310 mM | 310 mM | 310 mM |
| ENa | (Nernst pot’l) | 72.6 mV | 73.1 mV | 99.2 mV | 82.9 mV | 84.0 mV |
| EK | (Nernst pot’l) | −103.6 mV | −103.6 mV | −104.7 mV | −104.2 mV | −104.2 mV |
| ECl | (Nernst pot’l) | −79.0 mV | −64.3 mV | −86.0 mV | −86.0 mV | −85.6 mV |
| INaleak (st-st) | (Through PNa) | −78.2 pA | −77.1 pA | −14.75 pA | −52.1 pA | −14.66 pA |
| INav (st-st) | (Through PNav) | −0.07 pA | −0.14 pA | −2.3 × 10−7 pA | −2.4 × 10−7 pA | −3.3 × 10−7 pA |
| m | (H-H) | 0.013 | 0.013 | 0.000 | 0.000 | 0.000 |
| h | (H-H) | 0.987 | 0.987 | 1.000 | 1.000 | 1.0000 |
| m3h | (H-H) | 2.2 × 10−6 | 2.2 × 10−6 | 1.75 × 10−12 | 2.0 × 10−12 | 2.8 × 10−12 |
| n | (H-H) | 0.003 | 0.003 | 0.000 | 4.8 × 10−5 | 5.3 × 10−5 |
| ATP/s (st-st) | Consumption | 270.9 amol/s | 267.3 amol/s | 51.0 amol/s | 180.4 amol/s | 50.7 amol/s |
| Pump reserve | Max ATP/s /consumption | 2.1-fold | 2.12-fold | 11.1-fold | 3.1-fold | 3.4-fold |
| Miscellaneous | ||||||
| VolcellDonnanEq | (Notional) | 14,000 µm3 | 14,000 µm3 | 14,960 µm3 | 14,961 µm3 | 14, 952 µm3 |
| Volcellrupture | (Bilayer limit) | 8,920 µm3 | 8,920 µm3 | 8,920 µm3 | 8,920 µm3 | 8,920 µm3 |
CN-CD entries are from Table 1 of Dijkstra et al. (2016). Parameter terms: see List of abbreviations. As per Dijkstra et al. (2016), permeabilities (in µm3/s) are particular to the invariant membrane area here (2,000 µm2). Constants: F, Faraday constant, 96,485.333 coulombs/mol; R universal gas constant, 8.31446 J mol−1°K−1; absolute temperature, 310°K; specific membrane capacitance, 0.01 pF/µm2.
Donnan effectors rehabilitated
It is widely and correctly understood that energetically compromised cells risk death-by-Donnan effect. It is widely underappreciated, however, that Donnan effectors are cell-physiologically indispensable (Fig. 2 A). However, because “Donnan equilibrium” (DE) equals death, Donnan has come to be a dirty word. Thus, the all-important “passive stabilization of ECl near Vrest” in SMFs is alluded to frequently (e.g., Pedersen et al., 2016), but the mechanism by which this is achieved (i.e., by exploiting the osmo-electrical free energy inherent in SMFs’ abundant cytoplasmic Donnan effectors) is not. Thus, ion homeostasis gets overlooked as a role for SMFs’ ClC-1 channels (Jentsch and Pusch, 2018). Thus, the immense importance for vertebrate evolution of SMFs’ robust efficient Donnan dominated ([big PCl][small INaleak]) steady state seems to go unnoticed.
Underappreciated, by extension, is the pivotal role of SMFs’ unidentified small-valued PNa. This oversight is explicable because Vrest is usually calculated with the GHK voltage equation (e.g., Sperelakis, 2012; and see Hille, 2001, Eq. 14.10). There, the smaller the PNa, the less consequential the tiny INaleak carried by PNa. Using P-L/D equations for SMF steady state, however, shows that small PNa carries not an inconsequentially tiny INaleak but a powerfully tiny INaleak. It is powerful because it underlies SMFs’ tiny steady-state ATP consumption.
Rehabilitating Donnan effectors’ bad reputation as we do here highlights that, for vertebrate bodies (on a body mass basis), low-cost Donnan dominated steady states (as in SMFs) are the norm. High-cost Pump-Leak dominated steady states (as in neurons) are, and always have been (on a body mass basis), the special case (Table S1).
DMD: Fiber demise and fiber survival
DMD fiber necrosis is typically ascribed to Ca2+ necrosis (Claflin and Brooks, 2008; Allen et al., 2016; Mareedu et al., 2021), but as emphasized by Burr et al. (2014), who examined mdx Ca2+ necrosis via reverse operation of Na+/Ca2+ exchangers, underlying that Ca2+ necrosis is a preexisting Na+ overload. Summary comments by Burr and Molkentin (2015) reveal that the provenance of DMD Na+ overload is poorly understood. They write that “given the known mechanical defects within the dystrophic plasma membrane…alterations in calcium and sodium levels likely stem…from excessive activation of various channels and exchangers.” While this is mechanistically vague, what is clear is their implication that too much Na+ leak would account for chronic Na+ overload. Our analysis strongly suggests, however, that for chronic Na+ overload to result in fiber loss, too little Na+ pumping (i.e., low pump strength) would be a major factor, while too much Na+ leaking would be a dangerous exacerbating factor, but not a sole cause.
Specifically, modeling here shows how low pump-strength conditions elicit unwanted Na+ entry through normal Nav channels. Additionally, DMD fibers can have pathologically leaky Nav and/or cation channels that, under low pump-strength conditions, would contribute to chronic Na+ overloads. Modeling shows, too, the vastly different thresholds for cytotoxic swelling (elicited by spontaneous firing) in SMFs versus neurons.
For SMFs, the physiological “Na+-leak channel” (PNa) is not identified, but in neurons, smooth muscle, pancreatic cells, and others, the physiological (ion homeostatic) Na+-leak channel is a nonselective cation channel (Na leak channel nonselective [NALCN]; Lu et al., 2007; Kang et al., 2020). For decades, unidentified nonselective mdx fiber cation channels (their physiology unknown) have been considered problematic for passing unwanted ICa (Franco and Lansman, 1990; Yeung et al., 2005; Lansman, 2015; Ward et al., 2018). Whether they account for the SMF PNa is unknown, but as per Yeung et al. (2003) and as per simulations here, such channels, if overactive, would constitute a pathological INaleak.
DMD SMFs, whose ion homeostatic resilience declines with advancing disease state, experience what is, in effect, a chronic state of emergency. They cope by relying on the extraordinarily robust ion homeostatic strategy evolved by syncytial vertebrate SMFs for handling the inevitable (but for healthy fibers, transient) emergencies of SMF life: membrane tearing, interrupted vascular supply, and bouts of overexertion. Modeling suggests that refurbishing the emergency preparedness of DMD fibers (via improved operational pump strength and decreased Na+ leak via Nav1.4 and/or cation channels) could extend their already remarkable longevity.
List of abbreviations
| A-i, impermeant intracellular anion (= Donnan effector) |
| AChR, acetylcholine receptor (i.e., SMFs’ nicotinic cation-selective channel) |
| amol/s, attomoles/second (10-18 mole/second) |
| AP, action potential (Vm(t)) |
| ATP, adenosine triphosphate |
| Cm, total membrane capacitance of the cell model |
| CD, Charge Difference (all models are thus designated: CN-CD, MN-CD, SM-CD, LA-CD, WD-CD) |
| CN-CD, Cortical Neuron-CD (MODEL; the “parent” model; see Table 2) |
| DE, Donnan equilibrium |
| DMD, Duchenne muscular dystrophy |
| EionX, Nernst potential for named ion |
| EPSC, excitatory post-synaptic current (for SMFs, the endplate current) |
| GHK, Goldman–Hodgkin–Katz (electrodiffusive fluxes; open channel I/V relations) |
| H-H, Hodgkin-Huxley (for V-gated channels: non-dimensional parameters, m,h,n) |
| IionX, currents through channels permeant to ionX (or, if gated, then INav, IKv) |
| INaKpump, INa,pump, IK,pump, ImaxNaKpump (below, see 3Na+/2K+-ATPase & max) |
| Kv, voltage-gated potassium channel (or delayed rectifier) |
| LA-CD, Low ATPase-CD (MODEL;a low pump-strength SM-CD variant; see Table 2) |
| max, 100% levels for pump: maximal ATP-consumption (amol/s) or ImaxNaKpump |
| mdx, dystrophin-minus mouse |
| MN-CD,Minimal Neuron-CD (MODEL; CN-CD without co-transporter; see Table 2) |
| MRI, magnetic resonance imaging |
| 3Na+/2K+-ATPase, “the pump”; as an electrogenic ATP-consuming enzyme, it generates… unidirectional ((efflux) INa,pump + (influx) IK,pump) = hyperpolarizing INaKpump |
| NAi , the quantity (attomoles) of cytoplasmic impermeant anions |
| Nav, voltage-gated sodium channel |
| Nav-CLS, coupled left-shift (of Nav channel gating) |
| Pcatleak, permeability of cation-selective channel |
| PCl, PNa, PK, permeabilities of always-open (“background,” “resting,” “leak” channels selective for Cl-, Na+, K+ (thus, PNa:PK:PCl -- relative values in a specified membrane) |
| PH2O, membrane water permeability |
| PNav (or Kv or Clv), for V-gated channels permeability equivalents to gmax |
| P-L/D, Pump-Leak/Donnan |
| ROS, reactive oxygen species |
| SA, surface area (directly proportional to model parameter Cm) |
| SM-CD, Skeletal Muscle-CD (MODEL; see Table 2) |
| SMF, skeletal muscle fiber |
| UKCl, K/Cl cotransporter – maximal flux capacity |
| Vm, Vrest, membrane potential, resting (steady-state) potential |
| Vol, volume (Volcell is the corresponding cell model parameter) |
| WD-CD, Weak Donnan-CD (MODEL; an SM-CD analog, see Table 2) |
| A-i, impermeant intracellular anion (= Donnan effector) |
| AChR, acetylcholine receptor (i.e., SMFs’ nicotinic cation-selective channel) |
| amol/s, attomoles/second (10-18 mole/second) |
| AP, action potential (Vm(t)) |
| ATP, adenosine triphosphate |
| Cm, total membrane capacitance of the cell model |
| CD, Charge Difference (all models are thus designated: CN-CD, MN-CD, SM-CD, LA-CD, WD-CD) |
| CN-CD, Cortical Neuron-CD (MODEL; the “parent” model; see Table 2) |
| DE, Donnan equilibrium |
| DMD, Duchenne muscular dystrophy |
| EionX, Nernst potential for named ion |
| EPSC, excitatory post-synaptic current (for SMFs, the endplate current) |
| GHK, Goldman–Hodgkin–Katz (electrodiffusive fluxes; open channel I/V relations) |
| H-H, Hodgkin-Huxley (for V-gated channels: non-dimensional parameters, m,h,n) |
| IionX, currents through channels permeant to ionX (or, if gated, then INav, IKv) |
| INaKpump, INa,pump, IK,pump, ImaxNaKpump (below, see 3Na+/2K+-ATPase & max) |
| Kv, voltage-gated potassium channel (or delayed rectifier) |
| LA-CD, Low ATPase-CD (MODEL;a low pump-strength SM-CD variant; see Table 2) |
| max, 100% levels for pump: maximal ATP-consumption (amol/s) or ImaxNaKpump |
| mdx, dystrophin-minus mouse |
| MN-CD,Minimal Neuron-CD (MODEL; CN-CD without co-transporter; see Table 2) |
| MRI, magnetic resonance imaging |
| 3Na+/2K+-ATPase, “the pump”; as an electrogenic ATP-consuming enzyme, it generates… unidirectional ((efflux) INa,pump + (influx) IK,pump) = hyperpolarizing INaKpump |
| NAi , the quantity (attomoles) of cytoplasmic impermeant anions |
| Nav, voltage-gated sodium channel |
| Nav-CLS, coupled left-shift (of Nav channel gating) |
| Pcatleak, permeability of cation-selective channel |
| PCl, PNa, PK, permeabilities of always-open (“background,” “resting,” “leak” channels selective for Cl-, Na+, K+ (thus, PNa:PK:PCl -- relative values in a specified membrane) |
| PH2O, membrane water permeability |
| PNav (or Kv or Clv), for V-gated channels permeability equivalents to gmax |
| P-L/D, Pump-Leak/Donnan |
| ROS, reactive oxygen species |
| SA, surface area (directly proportional to model parameter Cm) |
| SM-CD, Skeletal Muscle-CD (MODEL; see Table 2) |
| SMF, skeletal muscle fiber |
| UKCl, K/Cl cotransporter – maximal flux capacity |
| Vm, Vrest, membrane potential, resting (steady-state) potential |
| Vol, volume (Volcell is the corresponding cell model parameter) |
| WD-CD, Weak Donnan-CD (MODEL; an SM-CD analog, see Table 2) |
Materials and methods
A P-L/D model for SMFs
The pump, GHK fluxes, excitability, Vrest(PNa:PK), Nav-CLS. (A) i and ii,3Na+/2K+ATPase. The P-L/D models here have pumps described by Eq. 10, copied from CN-CD (Dijkstra et al., 2016, who took them from Hamada et al., 2003); at saturating [Na+]I, for 100% pump strength (the normal or standard condition), ATP consumption is maximally 566 amol/s = 54.5 pA of INaKpump (see black dots). For SM-CD (green) and CN-CD (pink), the inset box pair shows the one-to-one correspondence of {steady-state [st-state] ATP consumption ([Na+]i)} and {INaKpump ([Na+]i)}. Double-color dot (A, i, main plot): steady-state [Na+]i for SM-CD. In the P-L/D models here, the external milieu is fixed, so pump sensitivity to [K+]e does not affect pump rates. (B i) Different pump strengths: up-scaled and down-scaled 100% curves from A, as labeled (note logarithmic y axis). Horizontal green dot-dash line: SM-CD ATP consumption (as in A). (B ii) expanded lower left B, i, shows that (for near-identical ATP-consumption) SM-CD and LA-CD maintain very different [Na+]i. (C) Electrodiffusion I-V plots (see GHK electrodiffusion flux Eq. 2 [Hille, 2001; Eq. 14.5) for the noted [ext]/[in] ratios for Na+ and [in]/[ext] ratios K+ and Cl− (y axis amperes are not specified since permeability values are not specified). Nernst potentials for 10-fold gradients (assuming room temperature) are shown. (D) Vrest in SM-CD with PNa:PK varied as shown. Vrest for P-L/D systems here (SM-CD, WD-CD, LA-CD, CN-CD, and MN-CD [100% pump strength]), their diverse PCl and ECl values notwithstanding, depends overwhelmingly on PNa:PK as shown. Blue dot: SM-CD with PNa reduced to 0.22 µm3/s. (E) For the Table 3 parameter values used here for excitable P-L/D models, voltage dependence of H-H variables tau-m,h,n and m,m3,h,m3h,n,n2. Excitable P-L/D models use leak permeabilities (PCl, PK, and PNa) in lieu of H-H gLeak, and the driving forces are electrodiffusive. (F) In bleb-damaged membrane, Nav channel activity exhibits irreversible hyperpolarizing shifts that scale with damage intensity (Wang et al., 2009; Boucher et al., 2012; Morris and Joos, 2016; Joos et al., 2017). In H-H terms, the damage makes both fast activation (m3) and fast inactivation (h) shift leftward by the same amount (CLS). Illustrated: before and after imposing 20 mV of Nav-CLS on the computational Nav channels. Encroachment on Vrest of the window conductance (expressed nondimensionally as m3h(Vm)) differs greatly for CN-CD versus SM-CD. -ve, negative; +ve, positive.
The pump, GHK fluxes, excitability, Vrest(PNa:PK), Nav-CLS. (A) i and ii,3Na+/2K+ATPase. The P-L/D models here have pumps described by Eq. 10, copied from CN-CD (Dijkstra et al., 2016, who took them from Hamada et al., 2003); at saturating [Na+]I, for 100% pump strength (the normal or standard condition), ATP consumption is maximally 566 amol/s = 54.5 pA of INaKpump (see black dots). For SM-CD (green) and CN-CD (pink), the inset box pair shows the one-to-one correspondence of {steady-state [st-state] ATP consumption ([Na+]i)} and {INaKpump ([Na+]i)}. Double-color dot (A, i, main plot): steady-state [Na+]i for SM-CD. In the P-L/D models here, the external milieu is fixed, so pump sensitivity to [K+]e does not affect pump rates. (B i) Different pump strengths: up-scaled and down-scaled 100% curves from A, as labeled (note logarithmic y axis). Horizontal green dot-dash line: SM-CD ATP consumption (as in A). (B ii) expanded lower left B, i, shows that (for near-identical ATP-consumption) SM-CD and LA-CD maintain very different [Na+]i. (C) Electrodiffusion I-V plots (see GHK electrodiffusion flux Eq. 2 [Hille, 2001; Eq. 14.5) for the noted [ext]/[in] ratios for Na+ and [in]/[ext] ratios K+ and Cl− (y axis amperes are not specified since permeability values are not specified). Nernst potentials for 10-fold gradients (assuming room temperature) are shown. (D) Vrest in SM-CD with PNa:PK varied as shown. Vrest for P-L/D systems here (SM-CD, WD-CD, LA-CD, CN-CD, and MN-CD [100% pump strength]), their diverse PCl and ECl values notwithstanding, depends overwhelmingly on PNa:PK as shown. Blue dot: SM-CD with PNa reduced to 0.22 µm3/s. (E) For the Table 3 parameter values used here for excitable P-L/D models, voltage dependence of H-H variables tau-m,h,n and m,m3,h,m3h,n,n2. Excitable P-L/D models use leak permeabilities (PCl, PK, and PNa) in lieu of H-H gLeak, and the driving forces are electrodiffusive. (F) In bleb-damaged membrane, Nav channel activity exhibits irreversible hyperpolarizing shifts that scale with damage intensity (Wang et al., 2009; Boucher et al., 2012; Morris and Joos, 2016; Joos et al., 2017). In H-H terms, the damage makes both fast activation (m3) and fast inactivation (h) shift leftward by the same amount (CLS). Illustrated: before and after imposing 20 mV of Nav-CLS on the computational Nav channels. Encroachment on Vrest of the window conductance (expressed nondimensionally as m3h(Vm)) differs greatly for CN-CD versus SM-CD. -ve, negative; +ve, positive.
Since animal cells do not sustain osmotic pressures, intra/extracellular (osmolyte) inequalities elicit a H2O flow until osmotic balance is restored; this results in Volcell changes at rates limited by the slower net flux component, at any time, of the two ions ([Na+ + Cl−]) whose joint net entry underlies osmotic Na+ loading.
Choice of leak permeabilities
Whereas CN-CD is precisely the Dijkstra et al. (2016) model, the SM-CD leak permeability ratio PNa:PK:PCl is broadly consistent with Fraser and Huang (2004); for more detail, see Setting Vrest in SM-CD and other CD models below.
GHK driving forces
Resting or leak currents
Cation channel currents
Voltage-gated Na+ current
PNav is the maximal membrane permeability to Na+ through a V-gated channel (operating in a Hodgkin-Huxley [H-H] fashion). m is the H-H Na+ channel activation/deactivation gating variable, and h is the H-H Na+ channel inactivation/recovery gating variable. The current’s driving force also follows the GHK form of Eq. 1.
Delayed rectifier K+ current
PKv is the maximal membrane permeability of K+ through a V-gated channel (delayed rectifier voltage-gated potassium channel [Kv], operating in a H-H fashion); n is the delayed rectifier K+ channel activation/deactivation gate variable.
Voltage-dependent gating
Voltage-dependent rates for H-H gating variablesa (functions plotted in Fig. 4 E)
| Term . | Expression . | Description . |
|---|---|---|
| αm(Vm) | Activation rate, voltage-gated Na+ channels (Nav) | |
| βm(Vm) | Deactivation rate, voltage-gated Na+ channels (Nav) | |
| αh(Vm) | Inactivation rate, voltage-gated Na+ channels (Nav) | |
| βh(Vm) | Recovery from inactivation rate, voltage-gated Na+ channels (Nav) | |
| αn(Vm) | Activation rate, delayed rectifier K+ channels (Kv) | |
| βn(Vm) | Deactivation rate, delayed rectifier K+ channels (Kv) |
| Term . | Expression . | Description . |
|---|---|---|
| αm(Vm) | Activation rate, voltage-gated Na+ channels (Nav) | |
| βm(Vm) | Deactivation rate, voltage-gated Na+ channels (Nav) | |
| αh(Vm) | Inactivation rate, voltage-gated Na+ channels (Nav) | |
| βh(Vm) | Recovery from inactivation rate, voltage-gated Na+ channels (Nav) | |
| αn(Vm) | Activation rate, delayed rectifier K+ channels (Kv) | |
| βn(Vm) | Deactivation rate, delayed rectifier K+ channels (Kv) |
Based on Kager et al. (2000), but as used in Dijkstra et al. (2016) with a typographical error corrected.
Voltage-dependent Cl− current
K/Cl cotransporter
This cotransporter (strength K/Cl cotransporter–maximal flux capacity [UKCl]) is present in CN-CD (SM lacks it; Pedersen et al., 2016) where (as per Dijkstra et al., 2016, except for an error in the log term of their Eq. 6) it is given by
3Na+/2K+ ATPase pump current
ATP consumption and hyperpolarizing INaKpump
Cell volume
Nernst potentials
CD and membrane potential
Number of intracellular ions
CD models account for the change in intracellular ions at any given moment (Fraser and Huang, 2004, 2007; Dijkstra et al., 2016), via the following simple relationships of the respective currents:
Setting Vrest in SM-CD and other CD models
An excitable cell’s Vrest (i.e., steady-state Vm) is typically more accessible (experimentally) than any cytoplasmic [ion] or Volcell. A consensus Vrest value is thus used for anchoring SM-CD; we chose Vrest = −86 mV. Other parameter determinants were then established iteratively as follows: first, a number is chosen for impermeant anions, NAi, consistent with the system’s total cation concentration (given the extracellular solution). Starting with CN-CD the value, we fine-tuned to meet our (self-imposed) requirement that SM-CD and CN-CD have the same resting Volcell. Thus, note in Table 2 the slightly different NAi for CN-CD and SM-CD (likewise, low ATPase [LA]–CD and SM-CD) and identical steady-state Volcell.
As per Eq. 16, a pump stoichiometry other than 3Na+out/2K+in would, all else being equal, alter Vrest. Pump stoichiometry is invariant here, but see Dmitriev et al. (2019).
Excitability and safety factor for SM-CD
For SM-CD to be hyperpolarized and appropriately excitable (i.e., relatively inexcitable), its input impedance had to be (1) notably less than for CN-CD and (2) predominantly PCl-based (Pedersen et al., 2016). With resting P values set, the need to trigger spikes near −60 mV (Fu et al., 2011) with a reasonable-sized safety factor (Ruff 2011) had to be met. To achieve safety factor ∼1.5, Nav and Kv densities in SM-CD were set at 3× the CN-CD level (a larger PCl would have required even greater V-gated channel densities). Thus, absolute PCl, PNa, and PK values of SM-CD are biologically appropriate, but leave room for physiological modulation (to, say, alter Vrest via ΔPNa or ΔPK, or to modulate excitability by ΔPCl).
Table 2 shows that m3h is vanishingly small at Vrest in SM-CD; for CN-CD it adds an extremely small Nav channel contribution to the operational value of PNa that negligibly affects Vrest.
Cytoplasmic Donnan effectors
Instantaneous perturbations
Experimental solution changes (e.g., as in brain slice experiments) typically require finite “wash-in/wash-out” times. Dijkstra et al. (2016) mimicked such solution changes (affecting pump rates and channel gating, etc.), but here, doing so would have unnecessarily obscured mechanistic underpinnings of responses. Thus, pump-off (anoxia) and pump-on (restoration of pump strength) changes and channel gating changes (Nav and cation channels open probabilities) are applied instantaneously.
Maximum cell volume before lysis
Both CN-CD and SM-CD have Cm = 20 pF and steady-state Volcell = 2,000 µm3. If 0.01 F/m2 (= 0.01 pF/µm2) is the specific capacitance of the bilayer, membrane area is 20/0.01 = 2,000 µm2. With 4πR3/3 the volume of a spherical cell and 4πR2 its surface area (SA), maximum Volcell as the cell swells (to spherical) would be = 4/3π(2,000/4π)3/2 = 8,410.4 µm3. Given a 4% bilayer elasticity strain limit (yielding membrane area = 2,080 µm2), rupture would occur at 8,920 µm3. Thus, in bifurcation plots, the notional DE values indicated for reference are unachievable by these models. Note too that present models depict neither SA regulation nor membrane tension homeostasis (see Morris, 2018).
Excitatory post-synaptic current (EPSC) via AChR channels
SM-CD APs are initiated by macroscopic EPSC through AChRs, which are nonselective cation channels that pass Na+ and K+ as per the GHK formalism. Our EPSC time course mimics a g(t) reported by Wang et al. (2004). As per Hille (2001), PK:PNa for IEPSC = 1.11:1. The function g(t) has a maximum of 1, and PNa,EPSC yields a 1.5-fold safety factor (i.e., an amplitude adjusted to 1.5× the threshold required to elicit an AP in SM-CD).
The end-plate current is
Nav–coupled left-shift (CLS) depiction of bleb damage to Nav-bearing membrane
Computational methods
Calculations involved solving sets of first order differential equations. These were done using Python with the ordinary differential equation solver odeint.
Online supplemental material
Fig. S1 is a high-resolution look at P-L/D processes as they move away, then back to steady state, during the several minutes it takes to redress the ion perturbations associated with a single synaptically triggered AP. Note the question and answer section in the supplemental text; it pertains to Fig. S1. Fig. S2 shows anoxic rundown (Vm(t) only) for SM-CD at variable time resolutions; anoxic rundown trajectories for CN-CD (Vm, [ion]i, Volcell); anoxic rundown for WD-CD (Vm and ATP consumption); an example of the consequences of altering pump Michaelis–Menten constants (dose–responses and steady-state [Na+]i computed for SM-CD in each case); and for the ischemic Vm(t) rundown of Fig. 6, the concurrent [Na+]i(t). Fig. S3 shows multiparameter bifurcation plots for SM-CD, including the spontaneous Vm(t) trajectory from the pathological steady-state continuum back to the continuum of physiological steady states. Table S1 emphasizes that, while in humans, the large disparity between the tissue mass of brains and SM is well-recognized, in the common ancestors of contemporary vertebrates, this disparity would have been substantially greater, making costly neuronal ion homeostasis in those early vertebrates relatively unproblematic, while placing a premium, even then, on the evolution of efficient and robust SM ion homeostasis. Supplemental text at the end of the PDF includes sections entitled P-L/D modeling of myotonia congenita: SMFs with a [small PCl][small INaleak] steady state, and P-L/D modeling of SM injury, tourniquets, compartment syndrome.
Results
P-L/D systems at steady state
Fig. 3 A and Table 2 show how SM-CD, a generic P-L/D model for excitable SMF membrane, parallels CN-CD (see Materials and methods). SM-CD uses the minimal set of flux elements (Fig. 2) needed for autonomous return to ion homeostatic steady state after an ionic perturbation. CN-CD incorporates a K/Cl cotransporter and thus has a nonminimal P-L/D steady state (poisoning the K/Cl cotransporter reveals its impact; in Table 2, compare steady-state values for CN-CD versus MN-CD). Including SMFs’ many cotransporters (see Fraser and Huang, 2004; Usher-Smith et al., 2009) in generic SM-CD would have been unhelpful (nevertheless, the CN-CD/MN-CD exercise is a simple how to). Because the extracellular milieu is fixed, pump sensitivity to [Na+]i (see Materials and methods; Fig. 4, A and B; Eq. 10) but not to [K+]ext is invoked.
At ion homeostatic steady state, by definition, passive entry and active extrusion of Na+ and of K+ precisely balance. In all models, PK >> PNa, and electrodiffusion driving forces (see Fig. 4 C) are almost always greater on Na+ than on K+. As detailed in Materials and methodsand shown in Fig. 4 D, the PK:PNa ratio sets Vrest in conjunction with pumping that always operates electrogenically (3Na+out/2K+in). Consequently, both the passive and active fluxes of K+ are constrained by the passive and (hyperpolarizing) active fluxes of Na+. Accordingly, when steady state is perturbed, INaleak (not IKleak) is rate limiting for flux trajectories, so throughout, Na+ fluxes are emphasized while the attendant K+ fluxes, though plotted, are mentioned less frequently.
In neuronal CN-CD, with PK the major permeability and resting INaleak large (78.2/14.75 = 5.3× that of SM-CD; Table 2, steady-state section), there is a Pump-Leak–dominated steady state, meaning that the balanced fluxes mostly use PK, PNa, and the Na+/K+ pump. For SM-CD, with PCl the major permeability and resting INaleak very small, steady-state fluxes are mostly permeant anions (only Cl− is modeled) via PCl whose influx/efflux is balanced by anionic Donnan effectors. SM-CD has a Donnan dominated steady-state. Before making further inter-model comparisons and subjecting them to DMD-like deficits, SM-CD’s broad “SMF credibility” is assessed via a physiological stress test.
Stress testing SM-CD
The Fig. 5 A AP stress test mimics a procedure for isolated rat soleus muscle, except that SM-CD is stimulated not electrotonically but by a train of EPSCs (through cation channels; see Materials and methods). As APs fire, [Na+]i rises, [K+]i falls, and ATP consumption abruptly increases. This is the P-L/D system’s [Na+]i-sensitive P-L active feedback in operation. Simultaneously, small increases in [Cl−]i and Volcell reflect the Donnan effector–mediated passive feedbacks (Fig. S1 details the EPSC and AP fluxes).
Stress testing SM-CD. (A) In SM-CD, Vm, [Na+]i, ATP-consumption, [K+]i, [Cl−]i, and Volcell trajectories before, during, and after 1,200 EPSC-stimulated APs; this mimics a rat muscle experiment (Nielsen and Clausen, 1997) summarized by Clausen (2015) as: “In isolated rat soleus…after 10 sec of stimulation at 120 Hz, the net Na+ reextrusion measured in the subsequent 30 sec of rest reaches a 22-fold increase in Na+, K+ pump activity corresponding to 97% of the theoretical maximum rate of active Na+, K+ pumping measured and calculated on the basis of total content of 3H-ouabain binding sites.” During AP train, SM-CD swells by <2.5%; more extreme SMF swelling might engage SMFs’ caveolar tension-buffer (see Sinha et al., 2011; Morris, 2018). This feature is not modeled here. (B) Y axis double-labeling in B serves as a reminder of the one-to-one correspondence between ATP-consumption and hyperpolarizing INaKpump (Fig. 4 A). Here, pump reserve is increased (from 11.1-fold, A) to 22.2-fold (closer to rat soleus; boxed area references Clausen’s (2015) summary.
Stress testing SM-CD. (A) In SM-CD, Vm, [Na+]i, ATP-consumption, [K+]i, [Cl−]i, and Volcell trajectories before, during, and after 1,200 EPSC-stimulated APs; this mimics a rat muscle experiment (Nielsen and Clausen, 1997) summarized by Clausen (2015) as: “In isolated rat soleus…after 10 sec of stimulation at 120 Hz, the net Na+ reextrusion measured in the subsequent 30 sec of rest reaches a 22-fold increase in Na+, K+ pump activity corresponding to 97% of the theoretical maximum rate of active Na+, K+ pumping measured and calculated on the basis of total content of 3H-ouabain binding sites.” During AP train, SM-CD swells by <2.5%; more extreme SMF swelling might engage SMFs’ caveolar tension-buffer (see Sinha et al., 2011; Morris, 2018). This feature is not modeled here. (B) Y axis double-labeling in B serves as a reminder of the one-to-one correspondence between ATP-consumption and hyperpolarizing INaKpump (Fig. 4 A). Here, pump reserve is increased (from 11.1-fold, A) to 22.2-fold (closer to rat soleus; boxed area references Clausen’s (2015) summary.
Single EPSC-triggered APs (SM-CD, LA-CD, and WD-CD). The canonical P-L/D task for SMFs: restore steady state after a cholinergic AP. The process is shown at high resolution (note scale variations) here for single EPSC-triggered APs in SM-CD, LA-CD, and WD-CD; Vm(t) traces almost completely overlap (in stress tests [Fig. 5, Fig. 12, and Fig. S2 D], these APs are triggered at 120 Hz). Osmo-balancing is almost instantaneous (PH2O is very large), so the initial AP-induced P-L/D response is a H2O blip (abrupt ↑Volcell, millisecond traces) whose height reflects the excess Na+ entry (i.e., Na+ entry not countered by simultaneous K+ exit). SM-CD and LA-CD blips (see overlapping traces) are slightly bigger than for WD-CD (whose larger PK accounts for the slightly smaller H2O blip). This fast ↑Volcell then partially reverses, to an extent dependent on how much electroneutralization of excess Na+ entry is achieved by Cl− entry (most of it for [big PCl] SM-CD and LA-CD; very little of it for [small PCl] WD-CD; see ↑[Cl−]i(t) at asterisks). Millisecond AP-related ion fluxes stimulate ion homeostatic feedback fluxes that take minutes. The restoration pace is set by sensor/effector pumping (Fig. 2 A) as it extrudes Na+ and reacquires K+ (= hyperpolarizing INaKpump), its rate proportional to [Na+]i. Passive Donnan–effector–centered sensor/effector feedbacks, meanwhile, move Cl− and H2O as required to keep H2O activity inside/outside balanced and the cytoplasm electroneutral. Low pump strength slows recovery (see LA-CD, Δ[ion]i(t) trajectories). After its fast double jump (responses to ↑[Na+]i from EPSC then AP), ATP consumption decays monotonically to steady state, at almost the same speed for SM-CD and WD-CD (WD-CD lies offscale; note y axes, double jump insets). ΔNa+(t) and ΔK+(t) overlap, therefore, for SM-CD and WD-CD, while low–pump strength LA-CD lags. The ΔVm(t) traces (top right) show the consequence of (post-AP) hyperpolarizing INaKpump(t). [Cl−]i(t) and Volcell(t) trajectories are not monotonic (nor is [A−]i(t), which changes inversely with Volcell(t) and [Cl−]I, not shown). The single oscillation (= Donnan bounce) reflects the interplay of P-L/D systems’ two sensor/effector processes. The Donnan bounce amplitude of WD-CD (see vertically amplified traces) is <0.1 that for Donnan-dominated SM-CD. Donnan bounces are bigger when PCl is bigger and slower when pump strength is weaker. Why the bounce? AChR channels support mostly Na+ entry. Then Nav channels open before Kv channels. So, Na+ + H2O enter (→blip), and then Kv activates (some K+ and H2O exit→partial reversal of blip) and (as needed for electroneutrality) Cl− enters. Meanwhile, [Na+]i-stimulated INaKpump extrudes 3Na+ per 2K+ imported, slightly hyperpolarizing Vm (top right). Ongoing Na+ extrusion makes the (previously swollen) cells transiently shrink because (with 3Na+ extruded per 2K+ imported) neutralizing Cl− plus osmo-balancing H2O exit the cell to accompany the net (extruded) Na+. [Cl−]i and Volcell resume steady-state levels as [Na+]i finishes its monotonic return. As INaKpump and INaleak equalize, steady state is reestablished. See Question and answers in the supplemental text for further information.
Single EPSC-triggered APs (SM-CD, LA-CD, and WD-CD). The canonical P-L/D task for SMFs: restore steady state after a cholinergic AP. The process is shown at high resolution (note scale variations) here for single EPSC-triggered APs in SM-CD, LA-CD, and WD-CD; Vm(t) traces almost completely overlap (in stress tests [Fig. 5, Fig. 12, and Fig. S2 D], these APs are triggered at 120 Hz). Osmo-balancing is almost instantaneous (PH2O is very large), so the initial AP-induced P-L/D response is a H2O blip (abrupt ↑Volcell, millisecond traces) whose height reflects the excess Na+ entry (i.e., Na+ entry not countered by simultaneous K+ exit). SM-CD and LA-CD blips (see overlapping traces) are slightly bigger than for WD-CD (whose larger PK accounts for the slightly smaller H2O blip). This fast ↑Volcell then partially reverses, to an extent dependent on how much electroneutralization of excess Na+ entry is achieved by Cl− entry (most of it for [big PCl] SM-CD and LA-CD; very little of it for [small PCl] WD-CD; see ↑[Cl−]i(t) at asterisks). Millisecond AP-related ion fluxes stimulate ion homeostatic feedback fluxes that take minutes. The restoration pace is set by sensor/effector pumping (Fig. 2 A) as it extrudes Na+ and reacquires K+ (= hyperpolarizing INaKpump), its rate proportional to [Na+]i. Passive Donnan–effector–centered sensor/effector feedbacks, meanwhile, move Cl− and H2O as required to keep H2O activity inside/outside balanced and the cytoplasm electroneutral. Low pump strength slows recovery (see LA-CD, Δ[ion]i(t) trajectories). After its fast double jump (responses to ↑[Na+]i from EPSC then AP), ATP consumption decays monotonically to steady state, at almost the same speed for SM-CD and WD-CD (WD-CD lies offscale; note y axes, double jump insets). ΔNa+(t) and ΔK+(t) overlap, therefore, for SM-CD and WD-CD, while low–pump strength LA-CD lags. The ΔVm(t) traces (top right) show the consequence of (post-AP) hyperpolarizing INaKpump(t). [Cl−]i(t) and Volcell(t) trajectories are not monotonic (nor is [A−]i(t), which changes inversely with Volcell(t) and [Cl−]I, not shown). The single oscillation (= Donnan bounce) reflects the interplay of P-L/D systems’ two sensor/effector processes. The Donnan bounce amplitude of WD-CD (see vertically amplified traces) is <0.1 that for Donnan-dominated SM-CD. Donnan bounces are bigger when PCl is bigger and slower when pump strength is weaker. Why the bounce? AChR channels support mostly Na+ entry. Then Nav channels open before Kv channels. So, Na+ + H2O enter (→blip), and then Kv activates (some K+ and H2O exit→partial reversal of blip) and (as needed for electroneutrality) Cl− enters. Meanwhile, [Na+]i-stimulated INaKpump extrudes 3Na+ per 2K+ imported, slightly hyperpolarizing Vm (top right). Ongoing Na+ extrusion makes the (previously swollen) cells transiently shrink because (with 3Na+ extruded per 2K+ imported) neutralizing Cl− plus osmo-balancing H2O exit the cell to accompany the net (extruded) Na+. [Cl−]i and Volcell resume steady-state levels as [Na+]i finishes its monotonic return. As INaKpump and INaleak equalize, steady state is reestablished. See Question and answers in the supplemental text for further information.
During, between, and after APs, permeability and driving forces for K+ and Na+ almost match. With the constraint for compartment electroneutrality thus almost met, the small excess Na+ influx is addressed by Cl−+ H2O influxes. Immediately after APs stop (AChR cation channels, Nav, and Kv all closed), only elements of SM-CD’s minimal P-L/D system remain in play. Vm hyperpolarization reflects the ↑[Na+]i, as pumping ↓[Na+]i to 3.7 mM, Vm converges to Vrest (INaleak = −INaKpump).
During the autonomous return to steady state, [Na+]i and [K+]i change monotonically, but [Cl−]i and Volcell oscillate. The quantity NAi (attomol of cytoplasmic Donnan effectors) is fixed; consequently, [A−]i falls and rises inversely with Volcell and [Cl−]i (not shown). During the AP train, [Cl−]i increases slightly with each AP’s small excess Na+ influx and consequent electro-neutralizing Cl− influx, a double entry constituting a cyto-osmolyte excess. With H2O activity higher externally than internally, an osmo-balancing influx of H2O occurs. Thus, for minimal SM-CD, [Cl−]i changes (∼4 mM increase when APs stop) are precisely mirrored by Volcell changes (∼2.5% increase; ΔVolcell <50 µm3; because PH2O is very large, no time lag is evident). Were the system to swell to notional DE (Table 2), Volcell (initially 2,000 µm3) would be ∼14,000 µm3 (↑700%). This provides a “thermodynamic size gauge” of how effectively, during 1,200 EPSC-triggered APs, Donnan dominated SM-CD forestalls osmotic swelling. With [INaleak] so small, [big PCl] does not render SM-CD vulnerable to osmotic Na+ loading. In SM-CD, the driving force on Cl− approaches 0 as the system converges on Vrest (a minimal P-L/D steady-state feature).
At 120 Hz, ion homeostasis does not quite fully restore steady state before the next AP, so parameter changes mount. When firing stops, reshrinkage begins immediately, undershooting before Volcell reconverges on steady state. This [Cl−]i(t), Volcell(t), [A−]i(t) oscillation, or “Donnan bounce,” is the slowest aspect of ion homeostatic restoration. Normal excitability would seldom be as demanding as the stress test; the speedy system rebound (only slightly more prolonged after 1,200 APs than after 1 AP (as per Fig. S1) is consistent with a hefty pump-reserve capacity for handling additional ENa-depleting tasks.
To handle multiple gradient-dissipating tasks (e.g., APs, ENa-dependent secondary transport, restoring gradients after microtear repair), ion homeostatic systems need a reserve, i.e., pump strength in excess of the steady-state requirement. Pump reserve is the thus the ratio (maximal ATP consumption)/(steady-state ATP consumption); or, in electrophysiological terms, pump reserve is (maximal INaKpump)/(steady-state INaKpump [= −steady-state INaleak]). The SM-CD pump reserve is 11.1-fold (see Table 2); for various rat muscles, pump reserves in the range 7–22-fold are reported (Clausen, 2015).
In DMD, pump reserve would decrease as pump strength fell and/or as Na+ leaks increased. Though maximal (100%) pump strength is identical in healthy CN-CD and healthy SM-CD, the [big INaleak] of CN-CD leaves it with a mere 2.1-fold pump reserve. No one parameter expresses how pump strength relates to a system’s global physiological resilience, but SMFs’ large pump reserves augur well.
For the same stress test but with pump reserve doubled (pump strength up-regulated to 200%), Fig. 5 B plots ATP consumption; peak ATP consumption is greater and recovery is faster (see legend regarding the recovery in rat soleus with a similar pump reserve) and (not shown) steady-state [Na+]i would drop to 2.7 mM (from 3.7 mM). The steady-state ATP consumption increase is trivial (compare Fig. 5, A and B, baselines: the ATP consumption increase in Fig. 5 B is almost undetectable). This feature (the ability to increase pump reserve with almost no increased steady-state expenditure) is crucial for physiological resilience. But to respond to transient physiological Na+ loading, mechanisms other than boosted pump strength are invoked; during episodes of intense firing, SMFs have a rapid-acting (seconds) “excitation-activation feed-forward” process that results in sustained post–AP-train [Na+]i undershoots (Nielsen and Clausen, 1997). While pump up-regulation (as per Fig. 5 B) operates in the direction needed, it would be too slow. The data by Nielsen and Clausen (1997) point to more expeditious mechanisms involving altered transport characteristics. For instance, if excitation-activation feed-forward signaling were to act by (arbitrarily) halving the SM-CD pump’s Na+-binding Michaelis–Menten constants, a [Na+]i undershoot (3.7→1.9 mM) would result (see Fig. S2 E). For perspective, pump strength up-regulation to 1,000% (ImaxNaKpump to 545 pA; maximal ATP consumption to 5,660 amol/s) reduces steady-state [Na+]i to 1.7 mM. While increased quantities of functional pump protein (thence bigger pump reserves) serve overall resilience well, fast-acting (and presumably temporary) pump kinetic adjustments serve physiological agility.
Anoxic rundown details, stress testing WD-CD, and other computations. (A) SM-CD anoxic rundown. Vm(t) with spontaneous firing expanded; note various colored locators. The t = 0 blue dot highlights the ∼2 mV pump off resistive-capacitive (RC) depolarization (from step turn off of hyperpolarizing INaKpump). 50 mV scale, lower right inset, applies also to upper right inset. (B) CN-CD anoxic rundown. The pump off depolarization triggers spontaneous APs almost immediately (the large INaKpump-off depolarization is more self-evident in Fig. 8, for inexcitable CN*-CD) and continues for ∼1 min. Ion gradients dissipate precipitously, a dire situation accelerated by the (pathological) opening, at approximately −20 mV, of a depolarization-activated Cl− pathway (Rungta et al., 2015; Dijkstra et al., 2016). (C) WD-CD anoxic rundown: Vm(t) and ATP consumption for the counterfactual Pump-Leak dominated SM-CD analog. (D) WD-CD stress tested: ATP consumption(t) and Vm(t) (boxed inset; same stress test as for SM-CD in Fig. 5). The WD-CD saddle node (the bifurcation analysis is not shown) occurs at 26.5% pump strength (versus 7.9% for SM-CD). (E) Shows how a post–stress-test [Na+]i undershoot in SMFs could occur if the mechanism for excitation activation involved modifying the pumps’ Michaelis–Menten kinetics as labeled in (Vrest −86.0→ −86.4 mV; ENa 99→118 mV; ATP consumption 51.0→51.2 amol/s). (F) The [Na+]i(t) trajectory corresponding to the Vm(t) trajectory of Fig 6.
Anoxic rundown details, stress testing WD-CD, and other computations. (A) SM-CD anoxic rundown. Vm(t) with spontaneous firing expanded; note various colored locators. The t = 0 blue dot highlights the ∼2 mV pump off resistive-capacitive (RC) depolarization (from step turn off of hyperpolarizing INaKpump). 50 mV scale, lower right inset, applies also to upper right inset. (B) CN-CD anoxic rundown. The pump off depolarization triggers spontaneous APs almost immediately (the large INaKpump-off depolarization is more self-evident in Fig. 8, for inexcitable CN*-CD) and continues for ∼1 min. Ion gradients dissipate precipitously, a dire situation accelerated by the (pathological) opening, at approximately −20 mV, of a depolarization-activated Cl− pathway (Rungta et al., 2015; Dijkstra et al., 2016). (C) WD-CD anoxic rundown: Vm(t) and ATP consumption for the counterfactual Pump-Leak dominated SM-CD analog. (D) WD-CD stress tested: ATP consumption(t) and Vm(t) (boxed inset; same stress test as for SM-CD in Fig. 5). The WD-CD saddle node (the bifurcation analysis is not shown) occurs at 26.5% pump strength (versus 7.9% for SM-CD). (E) Shows how a post–stress-test [Na+]i undershoot in SMFs could occur if the mechanism for excitation activation involved modifying the pumps’ Michaelis–Menten kinetics as labeled in (Vrest −86.0→ −86.4 mV; ENa 99→118 mV; ATP consumption 51.0→51.2 amol/s). (F) The [Na+]i(t) trajectory corresponding to the Vm(t) trajectory of Fig 6.
In summary, SM-CD, though radically simple, handles an excitability stress test in a manner qualitatively similar to rodent fibers. This general verisimilitude justifies using and modifying SM-CD to learn how altered or added features reflect the DMD situation.
Syncytial SMF morphology boosts ion homeostatic robustness
Steady state P-L/D values depend on membrane SA. Time courses depend on SA/Vol (represented here as Cm/Volcell). All models here have SA = 2,000 µm2 enclosing steady-state Volcell 2,000 µm3 (Table 2; and Fig. 3, A and B). However, to relate SM-CD to particular myofibers, syncytial morphology (Fig. 3, C and D) would matter. In an SMF, each 2,000 µm2 unit would encircle (not enclose) a myoplasmic volume. One fiber would comprise hundreds to thousands of contiguous 2,000 µm2 SM-CD ion homeostatic units, with cylindrical slice width varying with fiber radius (Fig. 3 D, i). Steady state would be 10× more efficient in a myofiber with SA/Vol 0.1 that of SM-CD. During rundown, that myofiber’s gradients would benefit from slower passive dissipation than SM-CD, but once dissipated, active recovery would also be slower than in SM-CD.
Steady-state costs: CN-CD versus Donnan dominated SM-CD versus Pump-Leak–dominated WD-CD
The PNa:PK ratio of SM-CD puts its Vrest >20 mV more negative than the reference model, CN-CD. In spite of the bigger driving force on Na+, SM-CD’s extremely small PNa makes its [small INaleak] and thence its steady-state ATP consumption 5.3× smaller. Since all models have the same maximal (100%) pump strengths, SM-CD’s pump reserve, too, is 5.3× that of CN-CD (Table 2). SM-CD pump reserve would coincide with CN-CD’s meager normal (2.1-fold) value when SM-CD pump strength fell to a mere 18%. Thus, even without factoring in syncytial morphology (a feature of SMFs, and not of neurons), the 5.3× differential bespeaks the extraordinary frugality and robustness of the ion homeostatic strategy adopted by SMFs relative to that of central neurons.
SM-CD/CN-CD comparisons are physio/pathophysiologically informative. They do not, however, provide a direct readout of how much of SM-CD’s robustness is attributable to its Donnan dominated steady state. For this we devised a counterfactual (Pump-Leak dominated) SM-CD analog, WD-CD. WD-CD, like SM-CD, is a minimal P-L/D system. Its maximal pump strength, PNa:PK ratio, Vrest, and low input impedance are all identical to SM-CD’s (Table 2). Having set the WD-CD PCl equal to CN-CD’s, we matched SM-CD’s low input impedance via large-valued PK and PNa (in Table 2, see absolute permeabilities and PNa:PK:PCl). WD-CD has [small PCl][big INaleak] steady state that consumes ATP at 180 amol/s (versus 51 amol/s for SM-CD). This drops WD-CD’s pump reserve to 3.1-fold (SM-CD: 11.1-fold). While WD-CD can handle the stress test, it is continually consuming (180/51) 3.5× more ATP than SM-CD, and after stress test, it takes more than two times longer than SM-CD to restore steady state (Fig. S2 D versus Fig. 5 A). For energetic efficiency, and by extension, for resilience during emergencies, SM-CD far outmatches its electrically equivalent analog, WD-CD.
Provenance of DMD fiber Na+ overload: Insufficient pumping? Too much leaking?
The provenance of chronic DMD fiber Na+ overload is unclear. To address this via SM-CD, we therefore ask the following: could chronic (i.e., steady state) overloads arise solely from (1) too little Na+ pumping (low pump strength) or from (2) too much Na+ leaking (leaky channels in damaged sarcolemma), or (3) do both contribute? As a principal cause of chronic DMD Na+ overload (i.e., with pump strength at 100% and Na+-permeant channels all functioning normally), hyperactive secondary transporters are not plausible and are not addressed here.
The magnitude of PNa in DMD fibers is unknown since SMF PNa is not identified. But mdx fibers have leaky nonselective cation channels (identified and unidentified; Carlson and Officer 1996; Lansman, 2015) and leaky Nav1.4 channels (Hirn et al., 2008). SMF pump proteins are well studied (e.g., Clausen, 2013, 2015; Hakimjavadi et al., 2018; Kravtsova et al., 2020), but for this generic comparison of SMF versus neuronal ion homeostatic strategies, we kept the same simple pump model as in CN-CD.
Kravtsova et al. (2020) report diminished pump-protein efficacy in mdx fibers, and several studies addressing Na+-overload point to diminished operational pump strength. Modulators that depress pumping (a machinery issue) increase mdx fiber Na+ overload (Table 1, item 4; Miles et al., 2011), and stimulating NO pathways (a supply issue related to functional ischemia) almost fully abolishes Na+ overload (Altamirano et al., 2014; Table 1, item 7). After reporting chronically elevated Na+ in DMD patients’ muscle (Table 1, item 5), Lehmann-Horn et al. (2012) noted unexpectedly improved muscle function in a dystrophic patient treated (to alleviate tissue edema) with eplerenone. Probing the mechanism via a rat diaphragm DMD model (Breitenbach et al., 2016), they found that eplerenone up-regulates Na+/K+-ATPase (via α-subunit Tyr10 dephosphorylation), causing an ouabain-sensitive fiber repolarization.
To exemplify an advanced-DMD (i.e., after infancy; Fig. 1 A) SM-CD variant, we use LA-CD (Table 2): it is SM-CD with pump strength at 30% and NAi decreased slightly so Volcell = 2,000 µm3. Further, we systematically characterize SM-CD’s P-L/D characteristics across pump strengths (SM-CD steady states as pump strength varies, below).
Pump reserve in DMD-like LA-CD is 3.4-fold (better than 2.1-fold in healthy CN-CD, substantially less than the 11.1-fold of healthy SM-CD), but Vrest and ATP consumption for LA-CD and SM-CD are almost the same. LA-CD’s 6.5 mM [Na+]i is inside the healthy range for mouse fibers according to some studies (see Table 1). So would LA-CD really represent an ailing DMD-like fiber? Yes. [Na+]i values for mice are extremely variable, but if, say, an mdx mouse fiber was using an ENa-depleting Na+ transporter (e.g., Iwata et al., 2007), 6.5 mM could easily become 7.3 mM, which Burr et al. (2014) (Table 1, item 8) report as chronically Na+ overloaded for mdx fibers. Moreover, even without knowing that healthy rodent SMFs maintain pump reserves in the 7–22-fold range (versus LA-CD’s 3.4-fold), LA-CD is a substandard P-L/D system vis-à-vis steady-state energetics: whereas SM-CD consumes ATP at 51 amol/s to achieve [Na+]i = 3.7 mM, LA-CD consumes ATP at 50.7 amol/s to achieve only 6.5 mM (see Materials and methods; Fig. 4 B, ii). LA-CD’s minimally lower ATP consumption is clearly no bargain. Compared with SM-CD, LA-CD would be classified as chronically Na+ overloaded, due solely to too little pumping. How nonlinear aspects of Na+ fluxes (too little pumping and too much leaking) contribute here will emerge further in the systematic pump-strength analysis (below).
Ischemic rundown to spontaneous firing
DMD fibers suffer exertion-induced bouts of functional ischemia (Thomas, 2013). A downstep to 0% pump strength would mimic anoxic or ouabain-poisoned rundown. As if severe ischemia suddenly reduced the ATP supply, Fig. 6 follows Vm(t) in SM-CD after a pump-strength downstep from 100% to 7.9% (maximally 44.7 amol/s ATP consumption, or 4.3 pA of INaKpump; trial and error show that 8% suffices but 7.9% is marginally less what SM-CD requires to maintain a steady state). In this trajectory, the system seems to restabilize near −65 mV but in fact continues depolarizing for hours at an exquisitely slow rate (barring any current noise, a syncytial fiber would depolarize even more slowly). Then, spontaneously, it fires APs. Why? Because at that Vm, INaleak (through PNa + Nav channels; in Fig. 4 E, see m3h(Vm)) exceeds the maximal Na+ extrusion achievable at 7.9% pump strength (4.3 pA). When firing ceases (after ∼30 s), the system slowly converges on a profoundly depolarized, pathological Vrest. As the inset plot shows, with even deeper ischemic downsteps, rundown to spontaneous firing speeds up, taking 22.7 min for 100%→0% pump strength (Fig. 6 plots only Vm(t), but [Na+]i(t) is in Fig. S2 F).
Ischemic rundown of SM-CD. Vm(t) trajectory on stepping SM-CD pump strength from 100% to 7.9%, so that marginally, INaKpump/INaleak <1. This mimics a tourniquet-application or compartment-syndrome situation (Johnstone and Ball, 2019). Rundown to spontaneous firing takes almost 10 h (a boxed inset expands the AP burst). After firing, SM-CD, still at 7.9% pump strength, slowly restabilizes (computationally) in a degraded pathological steady state. In situ, AP-triggered contractures would likely have destroyed a myofiber (Fig. S2 F is the concurrent [Na+]i trajectory). Inset graph: For ischemic transitions to even lower pump strengths, rundown times converge on SM-CD’s anoxic rundown time (100%→0%; 22.7 min, as per Fig. 7 A).
Ischemic rundown of SM-CD. Vm(t) trajectory on stepping SM-CD pump strength from 100% to 7.9%, so that marginally, INaKpump/INaleak <1. This mimics a tourniquet-application or compartment-syndrome situation (Johnstone and Ball, 2019). Rundown to spontaneous firing takes almost 10 h (a boxed inset expands the AP burst). After firing, SM-CD, still at 7.9% pump strength, slowly restabilizes (computationally) in a degraded pathological steady state. In situ, AP-triggered contractures would likely have destroyed a myofiber (Fig. S2 F is the concurrent [Na+]i trajectory). Inset graph: For ischemic transitions to even lower pump strengths, rundown times converge on SM-CD’s anoxic rundown time (100%→0%; 22.7 min, as per Fig. 7 A).
Fig. 6 could mimic application of tourniquets (MacDonald et al., 2021) and compartment syndrome (Tatman et al., 2020). Depending on the severity of vascular constriction in compartment syndrome, ischemic and anoxic fibers’ rundown to firing threshold would vary enormously, consistent with reports, in compartment syndrome, of the unpredictable timing of lethal threshold events (Johnstone and Ball, 2019). In DMD, compartment syndrome is thought to contribute to limb contracture (Siegel, 1992; Dooley and Chiasson, 2014). Extremely slow ischemic rundown buys time, fostering survival in connection with bouts of functional ischemia.
Anoxic rundown to spontaneous firing
In Fig. 6, pump feedback continually fights the passive cation (Na+ and K, w) leaks (though too weakly) while, concurrently, Donnan effector–mediated feedbacks operate at full force. In anoxic rundowns (i.e., 100%→0% pump strength at t = 0; Fig. 7), only the passive processes remain operative. Fig. 7 A, i, shows the SM-CD trajectories during anoxic rundown; spontaneous firing starts at 22.7 min. This Vm(t) is expanded in Fig. S2 A and compared there (Fig. S2 B) against the Vm(t) for CN-CD, where spontaneous firing starts at ∼100 ms. Because Dijkstra et al. (2016) mimic a brain-slice experiment’s slow wash-in of the pump-poison ouabain, their rundown is slow. Step changes, as used here, render the biophysics more transparent (e.g., INaKpump-off for SM-CD causes a ~Δ2 mV RC-type depolarization).
Anoxic rundown and recovery. (A, i–iii) SM-CD, anoxic (0% pump strength) rundown trajectories, as labeled, and the consequences (as monitored by Vm(t)) of restoring pump function. (B) Vm(t) during anoxic rundown of SM-CD with its PNa reduced enough to yield Vrest = 90 mV. (C i) LA-CD, anoxic rundown trajectories, as labeled. (C ii)Ion currents during the minutes just before, during, and after spontaneous firing (onset expanded vertically in inset box). (C iii) Effects (as monitored by Vm(t)) of restoring pump function. (D) Vm(t) for SM*-CD (inexcitable SM-CD) before, during, and after anoxic rundown (excerpt from Fig. 8).
Anoxic rundown and recovery. (A, i–iii) SM-CD, anoxic (0% pump strength) rundown trajectories, as labeled, and the consequences (as monitored by Vm(t)) of restoring pump function. (B) Vm(t) during anoxic rundown of SM-CD with its PNa reduced enough to yield Vrest = 90 mV. (C i) LA-CD, anoxic rundown trajectories, as labeled. (C ii)Ion currents during the minutes just before, during, and after spontaneous firing (onset expanded vertically in inset box). (C iii) Effects (as monitored by Vm(t)) of restoring pump function. (D) Vm(t) for SM*-CD (inexcitable SM-CD) before, during, and after anoxic rundown (excerpt from Fig. 8).
During prefiring rundown in SM-CD, Na+ influx (small PNa, large initial driving force) and K+ efflux (large PK, small initial driving force) nearly match. But a small excess (net) Na+ influx engenders small net influxes of Cl− and H2O (ΔVolcell reflects a net H2O flux); electro-neutrality and osmo-balance are thus maintained (see expanded prefiring Cl− and Volcell trajectories, Fig. 7 A, ii).
SM-CD’s biggest leak, PCl, does not set the pace for rundown toward DE. If, at t = 0, PNa and PK were blocked along with the pump, the cytoplasmic Donnan effectors would hold SM-CD at Vm = ECl = −86 mV. Upon reopening of PNa and PK, rundown would commence; the system’s smallest leak ([small INaleak]) with its large driving force would set the rate for ion gradient dissipation. Note that SM-CD depolarizes from −75 mV to −65 mV in ∼12 min, reasonably close to the rundown rate of ouabain-poisoned rat soleus SMFs (10 mV/10 min; Clausen and Flatman, 1977), whose rundown is consistent with a somewhat larger operational PNa and with those fibers’ more depolarized Vrest. Fig. 7 B, i, shows how sensitively SM-CD responds to a ΔPNa; there a 27% ↓PNa (0.3→0.22 µm3/s) hyperpolarizes Vrest (−86→ −90 mV), reduces steady-state ATP consumption (51→39 amol/s), and prolongs prefiring anoxic rundown (22.7→34.0 min).
With spontaneous firing, system permeabilities change vastly; intermittently open Nav and Kv channels support very large Na+ influxes and K+ effluxes. Cl− influx through SM-CD’s [big PCl] increases substantially to neutralize the now very large excess Na+ influx. With that [Na+ + Cl−] comes osmo-balancing H2O; spontaneous firing at 0% pump strength causes gross inflation, i.e., worst case scenario cytotoxic swelling.
Does PCl influence prefiring rundown speed? Negligibly in SM-CD, because always, the electro-diffusion driving force acting on Cl− is near zero. Thus, for 0.1× PCl, 1.0× PCl, and 10× PCl, spontaneous firing starts at 20.7, 22.7, and 23.8 min, respectively (not shown). Throughout prefiring rundown, SM-CD’s [big PCl] supports large Cl− effluxes and (marginally larger) influxes, but while net Na+ influx stays small, net Cl− influx stays equally small. The 7.9% pump-strength rundown of Fig. 6 is so slow because, there, pumping almost (but not quite) counters that small net leak. An implication is that though ↑PCl strongly inhibits endplate-triggered APs under energy-depleted conditions (Bækgaard Nielsen et al., 2017; Leermakers et al., 2020), it would not help forestall spontaneous firing in fibers whose pump strength was too low to sustain a steady state. Under those same conditions, however, a ↓PNa (as per Fig. 7 B, i) would both diminish endplate excitability (via Vrest hyperpolarization) and forestall spontaneous firing (slower rundown).
For SMFs in low pump-strength scenarios like Fig. 6 and Fig. 7 A, excitation–contraction coupling triggered as spontaneous firing started could result in fiber-destroying contractures (due release of [Ca2+]i; Claflin and Brooks, 2008). Though ion homeostatic failure would have brought on fiber demise, it might be characterized as Ca2+ necrosis.
Ion homeostatic recovery and spontaneous firing
The pathophysiological virtue of very slow rundown is evident in Fig. 7 A, iii: if pump strength is restored to 100% at any pre-time firing, the system can return to steady state. Just before firing starts, with [Na+]i at 20× its steady-state level, the resumed [Na+]i-sensitive Na+-extrusion (INaKpump) causes Vm to hyperpolarize until the system reconverges to steady-state [Na+]i and Vrest. If pumping is restored during spontaneous firing, the system can still return to steady state, but in situ, prospects for such recovery would be moot if anoxic-condition contractures (triggered by the spontaneous APs) had destroyed the fiber (Claflin and Brooks, 2008).
A pathological P-L/D steady state: Nav window conductance
If pump strength is restored even 100 ms after spontaneous firing stops (Fig. 7 A, iii, bottom), the system shows new behavior. Unable to return to healthy Vrest, SM-CD instead converges on a depolarized ATP-devouring steady state of degraded ion gradients and a pathological Vrest (−22 mV). Hyperpolarizing INaKpump, though maximally stimulated by the extreme [Na+]i, cannot surmount the depolarizing INaleak. The problem: operational PNa has acquired a new component (i.e., one not in force at SM-CD’s healthy steady state). In the pathologically restabilized system, Nav channel window conductance contributes to INaleak (for m3h(Vm) at −22 mV, see Fig. 4 E). The system is in depolarizing block (not shown). To return from this pathological steady state to a physiological steady state would require that maximal INaKpump up-regulate enough that hyperpolarizing INaKpump would exceed the depolarizing INav-augmented INaleak (≥339% pump strength is needed; Fig. S3 D, i and ii). For CNs, Dijkstra et al. (2016) propose such recovery scenarios; whether comparable scenarios relate to SMF ischemia-reperfusion injury is outside our scope (Dudley et al., 2006; Schmucker et al., 2015; Li et al., 2020).
Full SM-CD bifurcation analysis for five P-L/D parameters. Analysis is partially showin in Fig. 9. Shown are (A) [K+]i, (B) [Cl−]i, (C) [Na+]i, (D, i and ii) Vm, and (E, i–iii) Volcell. Bifurcation plots show the physiological and pathological continua, with X, the saddle node on the physiological steady-state continua, and #, the unstable threshold on the pathological steady-state continua (Dijkstra et al. [2016] designate the CN-CD # a Hopf bifurcation point). In D, ii, at t = 0, SM-CD (on the pathological continuum at 338% pump strength) is stepped →339% pump strength, which destabilizes the pathological system. SM-CD’s spontaneous Vm(t) recovery trajectory is plotted (D, ii) with expanded section at blue arrow. The Volcell bifurcation plot (E) is expanded twice. For comparison, CN-CD’s unstable points are added in some plots; SM-CD’s greater Nav density is a factor in the greater pump strength needed (#399% versus #181% for CN-CD) for return to the physiological continuum. DE values are notional since, as indicated (E, i), DE could not be achieved given Cm and NAi (membrane rupture would occur near the indicated Volcell). In Dijkstra et al. (2016), cross-sectional area for CN-CD is plotted, not Volcell, so CN-CD threshold points are recalculated here. Saddle nodes (X) in E, iii, show that until CN-CD destabilizes (<65% pump strength), it swells negligibly, and that until SM-CD destabilizes (<8% pump strength), it swells more, but still by only a few percent.
Full SM-CD bifurcation analysis for five P-L/D parameters. Analysis is partially showin in Fig. 9. Shown are (A) [K+]i, (B) [Cl−]i, (C) [Na+]i, (D, i and ii) Vm, and (E, i–iii) Volcell. Bifurcation plots show the physiological and pathological continua, with X, the saddle node on the physiological steady-state continua, and #, the unstable threshold on the pathological steady-state continua (Dijkstra et al. [2016] designate the CN-CD # a Hopf bifurcation point). In D, ii, at t = 0, SM-CD (on the pathological continuum at 338% pump strength) is stepped →339% pump strength, which destabilizes the pathological system. SM-CD’s spontaneous Vm(t) recovery trajectory is plotted (D, ii) with expanded section at blue arrow. The Volcell bifurcation plot (E) is expanded twice. For comparison, CN-CD’s unstable points are added in some plots; SM-CD’s greater Nav density is a factor in the greater pump strength needed (#399% versus #181% for CN-CD) for return to the physiological continuum. DE values are notional since, as indicated (E, i), DE could not be achieved given Cm and NAi (membrane rupture would occur near the indicated Volcell). In Dijkstra et al. (2016), cross-sectional area for CN-CD is plotted, not Volcell, so CN-CD threshold points are recalculated here. Saddle nodes (X) in E, iii, show that until CN-CD destabilizes (<65% pump strength), it swells negligibly, and that until SM-CD destabilizes (<8% pump strength), it swells more, but still by only a few percent.
The DMD-like low pump-strength SM-CD variant (LA-CD) can handle rundown and recovery
Chronically low–pump-strength (30%) LA-CD has the same PNa as SM-CD. Though LA-CD is mildly Na+ overloaded, its small PNa (thence [small INaleak]) keeps anoxic rundown (Fig. 7 C, i) almost as slow as for SM-CD; it fires spontaneously at 22.0 min (22.7 for SM-CD), passing currents essentially indistinguishable from SM-CD (shown for LA-CD only; Fig. 7 C, ii). LA-CD’s pump reserve (3.4-fold) suffices to restore the system at any point during rundown and until spontaneous firing stops (Fig. 7 C, iii), but recovery is slower than for SM-CD.
Donnan-driven swelling: Small PNa versus small PCl
A priori, if a P-L/D system’s only flux mechanisms are those operative at steady state, temporary loss of pump strength is always fixable (ignoring perils, in situ, from extreme cell inflation). Thus, systems with V-gated channels zeroed recover after prolonged, deeply depolarizing anoxia, as shown (Fig. 7 D) for SM*-CD (SM-CD with V-gated channels eliminated). After 105 min of anoxia, Vm has depolarized to −20 mV. Then, ∼5 min after restoration of 100% pump strength, Vm = −86 mV; SM*-CD recovers fully (albeit more slowly) with restoration to any value ≥8% pump strength (not shown).
For all parameters, Fig. 8 compares rundown trajectories for SM*-CD and CN*-CD (CN-CD without V-gated channels). Note how SM*-CD, which has [big PCl] and small PNa, exerts a more powerful brake against Donnan effector–induced swelling than CN*-CD, which has [small PCl] and large PNa. The [big PCl]/(Donnan effector) collaboration used by SMFs lets them be electrically leaky yet metabolically tight.
Anoxic rundown of inexcitable (*) SM-CD and CN-CD. SM*-CD and CN*-CD are SM-CD and CN-CD with all V-gated channels zeroed (gNav, gKv, and the gCl(V) of CN-CD). CN*-CD, like CN-CD, has a nonminimal steady state since its K/Cl cotransporter remains operative. SM*-CD is a minimal P-L/D system. Vm panel arrows indicate ΔVm at INaKpump-off and INaKpump-on (depolarizing and hyperpolarizing, respectively). INaKpump-off depolarizes SM*-CD by <2 mV and CN*-CD by ∼8 mV (in excitable CN-CD, the ΔVm from INaKpump-off elicits spontaneous APs; see Fig. S2 B). SM*-CD rundown is like Fig. 2 of Fraser and Huang (2004) (inexcitable amphibian SMF, Vrest = −90 mV). CN*-CD swells 140% in 20 min. SM*-CD swells 140% in 76 min. At 105 min (INaKpump-on), the ↑[Na+]i maximally stimulates pumps (54.5 pA) in CN*-CD. After 15.5 h (not shown) of anoxic rundown, SM*-CD shows the Na+-gradient dissipation present in CN*-CD at 105 min. After 272 min of rundown, both models recover (not shown). If recovery is initiated with both systems at any given Vm, the larger PNa of CN*-CD makes its recovery slower (not shown).
Anoxic rundown of inexcitable (*) SM-CD and CN-CD. SM*-CD and CN*-CD are SM-CD and CN-CD with all V-gated channels zeroed (gNav, gKv, and the gCl(V) of CN-CD). CN*-CD, like CN-CD, has a nonminimal steady state since its K/Cl cotransporter remains operative. SM*-CD is a minimal P-L/D system. Vm panel arrows indicate ΔVm at INaKpump-off and INaKpump-on (depolarizing and hyperpolarizing, respectively). INaKpump-off depolarizes SM*-CD by <2 mV and CN*-CD by ∼8 mV (in excitable CN-CD, the ΔVm from INaKpump-off elicits spontaneous APs; see Fig. S2 B). SM*-CD rundown is like Fig. 2 of Fraser and Huang (2004) (inexcitable amphibian SMF, Vrest = −90 mV). CN*-CD swells 140% in 20 min. SM*-CD swells 140% in 76 min. At 105 min (INaKpump-on), the ↑[Na+]i maximally stimulates pumps (54.5 pA) in CN*-CD. After 15.5 h (not shown) of anoxic rundown, SM*-CD shows the Na+-gradient dissipation present in CN*-CD at 105 min. After 272 min of rundown, both models recover (not shown). If recovery is initiated with both systems at any given Vm, the larger PNa of CN*-CD makes its recovery slower (not shown).
Fig. 8 suggests that during prolonged quiescent periods (as different as hibernation or post-injury tissue remodeling; Jackson, 2002; Baumann et al., 2020), SMFs could optimize prospects for eventual ion homeostatic recovery by preemptively zeroing Nav1.4 channels (e.g., by promoting slow-inactivated [Webb et al., 2009] or other nonpermeant states [Kiss et al., 2014]; likewise for ↓PNa and ↓PK [Donohoe et al., 2000]).
SM-CD steady states as pump strength varies
Generic neuron models (Hübel et al., 2014) including CN-CD (Dijkstra et al., 2016) show that ion homeostatic steady states change nonlinearly as pump strength falls. Spontaneously, at discrete points (thresholds) in parameter space, CN-CD destabilizes and exhibits bistability. These characteristics are also evident in SM-CD. P-L/D bistability is unrelated to whether a system’s steady state is dominated by (actively balanced) cation fluxes or (passively balanced) anion fluxes; bistable ion homeostasis is a (computational) trait of P-L/D systems with embedded voltage-gated channels.
SM-CD has two nonlinear Na+ flux mechanisms: INaKpump([Na+]i) and INav(Vm). How, in principle, their interplay renders SM-CD computationally bistable is shown with the steady-state Vm (pump strength) bifurcation plot in Fig. 9 A (the complete set of SM-CD bifurcation plots, plus the Vm(t) recovery trajectory at 339% pump strength, is in Fig. S3). The solid black line is the continuum of physiological steady states. Spanning the same pump-strength range, the solid blue line is a continuum of pathological steady states. “Bistable” signifies that, across part of the pump-strength range, these two continua overlap. On each continuum, an unstable threshold (bifurcation point) occurs: X and # at pump strengths 7.9% and 339%, respectively. For CN-CD, analogous instabilities (X and #) occur at pump strengths 65% and 181%, respectively (Dijkstra et al., 2016).
SM-CD steady-state bifurcation plots. (A) The SM-CD bifurcation plot for steady-state Vm (pump strength); stable values form physiological (black line) or pathological (blue line) continua (for the full set of SM-CD bifurcation plots, see Fig. S3). Green dot: normal steady state for SM-CD (Vrest in A). DE is the notional DE point. Unstable values (thresholds): # and the saddle node (X) (7.9% pump strength for SM-CD). In excitable P-L/D systems, instabilities (at # and at X) result in spontaneous APs (as seen for 100%→7.9% in Fig. 6; note that if the system was chronically at low pump strength (e.g., 8%), then dropped to 7.9%, firing would start soon thereafter). If the system attained the pathological continuum, rescue would be possible only by increasing hyperpolarizing INaKpump to # (pump strength 339%; Fig. S3 D, ii, gives the trajectory). Though A illustrates the inherent computational bistability of SM-CD as an excitable P-L/D system (like CN-CD; Dijkstra et al., 2016), AP-triggered contracture would preclude SMF survival beyond (X) (see Claflin and Brooks 2008). For DMD fibers, the relevant bifurcation analysis sector is therefore that circled; starting from 100%, it takes in the deeply compromised danger zone (boxed region) and the saddle node (X). (B) For pump-strengths of 100% and down, the physiological steady-state continuum for SM-CD parameters, as labeled. (C) Steady-state [Na+]i (pump strength) indicating how an episode of functional ischemia could take the system into the danger zone. (D) Up-regulated physiological continua for [Na+]i and ATP consumption (note the extremely expanded y axes); in SM-CD, 200% pump strength corresponds to 22.2-fold pump reserve.
SM-CD steady-state bifurcation plots. (A) The SM-CD bifurcation plot for steady-state Vm (pump strength); stable values form physiological (black line) or pathological (blue line) continua (for the full set of SM-CD bifurcation plots, see Fig. S3). Green dot: normal steady state for SM-CD (Vrest in A). DE is the notional DE point. Unstable values (thresholds): # and the saddle node (X) (7.9% pump strength for SM-CD). In excitable P-L/D systems, instabilities (at # and at X) result in spontaneous APs (as seen for 100%→7.9% in Fig. 6; note that if the system was chronically at low pump strength (e.g., 8%), then dropped to 7.9%, firing would start soon thereafter). If the system attained the pathological continuum, rescue would be possible only by increasing hyperpolarizing INaKpump to # (pump strength 339%; Fig. S3 D, ii, gives the trajectory). Though A illustrates the inherent computational bistability of SM-CD as an excitable P-L/D system (like CN-CD; Dijkstra et al., 2016), AP-triggered contracture would preclude SMF survival beyond (X) (see Claflin and Brooks 2008). For DMD fibers, the relevant bifurcation analysis sector is therefore that circled; starting from 100%, it takes in the deeply compromised danger zone (boxed region) and the saddle node (X). (B) For pump-strengths of 100% and down, the physiological steady-state continuum for SM-CD parameters, as labeled. (C) Steady-state [Na+]i (pump strength) indicating how an episode of functional ischemia could take the system into the danger zone. (D) Up-regulated physiological continua for [Na+]i and ATP consumption (note the extremely expanded y axes); in SM-CD, 200% pump strength corresponds to 22.2-fold pump reserve.
For SM-CD, the expectation (in situ) of lethal contracture at X (7.9% pump strength) makes the upper continuum moot. SM-CD is stepped from 100% to 7.9% pump strength in Fig. 6, but if SM-CD was stepped (say) 8% pump strength→X (7.9%), spontaneous firing and (in situ) contracture would follow almost immediately.
Assuming the pathological steady-state continuum to be inaccessible in situ, Fig. 9 B plots only physiological steady states, and only for the range most relevant to DMD (encircled in Fig. 9 A), i.e., from 100% → through the saddle-node (X) to 0% pump strength. SM-CD, 30% pump strength, plotted here is almost the same as LA-CD.
LA-CD is the tolerably robust low pump-strength (30%) system (e.g., Fig. 7 C) whose elevated steady-state [Na+]i already indicated that, in principle, too little pumping alone could underlie a small chronic Na+ overload. The Fig. 9 B [Na+]i plot shows that as pump strength drops below that 30%, extreme chronic Na+-overload values develop, approaching 88 mM before system destabilization at the saddle node (7.9% pump strength, X). At pump strengths from ∼20% to 15% down through 8%, SM-CD would unquestionably be considered chronically Na+ overloaded.
Insofar as pump strengths ≤30% mimic advanced disease-state DMD fibers, chronic Na+ overload of DMD/mdx fibers could result solely from too little Na+ pumping with the proviso that, in that situation, unwanted Nav channel window conductance increases operational PNa in the low pump-strength danger zone leading to X. That pathological ↑PNa, we emphasize, is attributable to normally functioning Nav channels. Nav channels overactive in the damaged sarcolemma of DMD fibers will be addressed below.
Functional ischemia: Moving in and out of the danger zone
In DMD, transient functional ischemia could take chronically low pump-strength fibers (say, at 30%) perilously rightward toward X, as depicted in Fig. 9 C,. Equally important, however, is what this plot conveys regarding prospects for recovery as fibers approach X: 8% pump strength is still on the physiological continuum, so any intervention, no matter how small, that elevates operational pump strength >8% will contribute to fiber survival by moving the system leftward. This seems self-evident/unremarkable until consideration is given to CN-CD, whose saddle node (X) is at 65% pump strength. If CN-CD pump strength falls <65%, recovery is only possible if pump strength can be boosted to ≥181% (yielding the ↑hyperpolarizing INaKpump needed to take CN-CD to its #, the unstable recovery threshold on its pathological continuum; Dijkstra et al., 2016; or pink X, # in Fig. S3). For DMD-afflicted SMFs, Fig. 9 C suggests that provided pump strength is ≥8%, even procedures as minor as massage treatments and vibration that improves bloodflow could, and evidently do (Saxena et al., 2013; Carroll et al., 2020), improve DMD fiber viability.
Extracellular Donnan effectors are invariant in SM-CD, but at very small pump reserve (the danger zone), their concentration would affect steady state (Mehta et al., 2008). Because Coles et al. (2019) report protease release of extracellular matrix proteins in exercised mdx fibers, extracellular Donnan effector influences (particularly in connection with ischemia-related ΔpH; Hagberg, 1985) could be worth revisiting.
Nonosmotic Na+ loading, even in the danger zone
Fig. 9 B shows SM-CD as robust above ∼40% pump strength (pump reserve there: 4.4-fold) and deteriorating steeply below ∼20%, the danger zone where ATP consumption (=hyperpolarizing INaKpump) falls sharply as [Na+]i rises steeply. Vm-related nonlinearities create a vicious positive feedback via two novel flux-mechanism features (i.e., features negligible or not applicable in the 100% to ∼40% pump-strength range): (1) Na+ saturation of [Na+]i-sensitive hyperpolarizing Na+ extrusion (see Materials and methods; Fig. 4 A; see approach to ∼90 mM [Na+]i), and (2) undesirable recruitment of Nav channels to operational PNa. [Na+]i rises steeply as reduced hyperpolarizing INapKump fails to counteract the Nav-augmented depolarizing INaleak. These altered steady-state features pull SM-CD ever closer to defeat: i.e., spontaneous firing and cytotoxic swelling at X.
Nevertheless, right through the danger zone (until X), Na+ loading and K+ depletion remain well-matched. Thus, Cl− influx and thus H2O influx stay small (note the y axis values for steady-state [Na+]i, [K+]i, and [Cl−]i). Not shown, from 100%→X, impermeant cytoplasmic anions dilute slightly ([A−]i: 149.6 mM→143.1 mM). Even at the saddle node (X), where [Na+]i = 88 mM, steady-state [Na+ + Cl−] loading is so minor that osmo-balancing H2O entry has swollen SM-CD by only ∼4.5% (2,000 µm3→ ∼2,090 µm3).
Thus, [big PCl]-endowed SM-CD can sustain enormous low pump-strength–induced Na+ overloads with inconsequential water uptake. Weber et al. (2012), following the first use of 23Na-MRI with DMD patients, stressed the chronic nature of the overload, but could not assess if it signified cytotoxic swelling. More recently, using 23Na-proton-MRI, Gerhalter et al. (2019) showed that DMD patients’ chronic Na+ overload can occur in the absence of water T2 alterations, consistent with SM-CD modeling here.
Membrane damage: Too much Na+ leak in DMD
For SMFs, PK >> PNa, specifically (as modeled in SM-CD and LA-CD), PK:PNa is 1:0.03. If, in SMFs, nonselective cation channels with PK:PNa = 1:1 were to activate to an extent that doubled resting PNa (0.3 µm3/s→0.6 µm3/s; a 100% increase), total PK would increase just 3%, making this cation channel leak principally a Na+ leak. Both the hormonally regulated NALCN of various excitable cells (Lu et al., 2007; Cochet-Bissuel et al., 2014; Lutas et al., 2016; Philippart and Khaliq, 2018; Reinl et al., 2018) and the AChR channels of SMFs are nonselective cation channels serving as physiological Na+ leaks. To date, no SMF isoform of NALCN has been detected, but SMFs express various cation channels (Metzger et al., 2020), any of which, if overactive, would augment operational PNa. Unidentified overactive mechanosensitive cation channels in mdx fibers are a proposed therapeutic target for GsMtx4-based peptides (Franco and Lansman, 1990; Gnanasambandam et al., 2017; Ward et al., 2018). Like inappropriately active mdx AChR-cation channels (Carlson and Officer 1996), they are considered dangerous as Ca2+-entry paths (Yeung et al., 2005; Lansman, 2015; Ward et al., 2018), but if so, unavoidably, they would also be pathological Na+-leak channels (McBride et al., 2000; Yeung et al., 2003).
AChRs are identified, abundant, reportedly leaky in mdx (Carlson and Officer 1996), mechanosensitive and inhibitable by GsMtx4 (Pan et al., 2012), and known to exhibit spontaneous activity (Jackson et al., 1990), whose frequency could increase in damaged junctional mdx sarcolemma (Barrantes et al., 2010; Baenziger et al., 2017; Pratt et al., 2015; Kravtsova et al., 2020). We model leaky cation channels, therefore, using the SMF AChR channel PK:PNa ratio (1.11:1; Hille, 2001) but refer simply to leaky cation channels.
SMFs’ largest physiological Na+ influxes are via Nav1.4 channels bound via syntrophin to dystrophin (Gee et al., 1998; Fu et al., 2011). In mdx, sarcolemmal Nav1.4 density is subnormal, but gating appears normal (Mathes et al., 1991; Ribaux et al., 2001; Hirn et al., 2008). Hirn et al. (2008) show that in the 3 d after mechanically traumatic fiber isolation, 3 nM tetrodotoxin protects mdx fibers from Na+ loading and die off. In the bleb-damaged sarcolemma of DMD fibers (Fig. 1 B), Nav1.4 channels could exhibit left-shifted window conductance (Nav-CLS;Boucher et al., 2012; see Materials and methods; Fig. 4 F).
The next sections address these two classes of sarcolemma damage–mediated Na+ leaks: first Nav-CLS, then overactive cation channels.
Nav-CLS: Treacherous but not a sole cause of chronic Na+ overload
For CN-CD and for SM-CD subjected to increasing Nav-CLS (at pump strength = 100%), Fig. 10 depicts system excitability (normal, hypersensitive, spontaneous; red line, top) and the systems’ steady-state P-L/D values. The term affected channels 0.3 (AC = 0.3) means that damage-induced Nav-CLS affects 3/10th of the Nav channel bearing membrane (see Materials and methods); as per Wang et al. (2009), more intense bleb-type damage→↑CLS (in mV).
Membrane-damage induced Nav-CLS in CN-CD and SM-CD. (A) CN-CD, as labeled, pump strength at 100%. (B, i and ii) SM-CD, as labeled, pump strength at 100%. stim, stimulus. Until the onset of spontaneous firing, plots are for steady-state (st-state) values. Beyond vertical blue lines, there is spontaneous firing (beginning at Nav-CLS[0.3] = 24.5 mV for SM-CD) with plots values time averaged (integrated for ≥100 s). Computations beyond Nav-CLS[0.3] = 20 mV were done at x axis values (in mV) 21, 22, 23, 23.5, 24.5, 25, 26, 27, 28, 29, 29.5, and 30. ii illustrates, for SM-CD, low-frequency firing (e.g., <2 Hz, Nav-CLS[0.3] = 25 mV) through to burst firing (e.g., Nav-CLS[0.3] = 28.5 mV). Sustained firing at 28 mV elevates [Na+]i only to ∼6 mM. The Vm plot’s most hyperpolarized point (for Nav-CLS[0.3] = 29 mV) occurs where spontaneous AP bursts fire from a baseline hyperpolarized by the Na+-stimulated INaKpump. Across the range 25.0–29 mV, the Nav-CLS[0.3] damage acts as a (pathological) Nav-based pacemaker conductance in a cell that should be quiescent. Then precipitously beyond Nav-CLS[0.3] = 29 mV, the damage-induced INav would be lethal with the onset of cytotoxic swelling (i.e., [Na+ + Cl− + H2O] loading). Beyond 29 mV, hyperpolarizing INaKpump (100% pump strength notwithstanding) is insufficient to redress the depolarizing INaleak carried by the pathological operational PNa (i.e., normal PNa + left-shifted Nav channels) plus INav from the spontaneous APs.
Membrane-damage induced Nav-CLS in CN-CD and SM-CD. (A) CN-CD, as labeled, pump strength at 100%. (B, i and ii) SM-CD, as labeled, pump strength at 100%. stim, stimulus. Until the onset of spontaneous firing, plots are for steady-state (st-state) values. Beyond vertical blue lines, there is spontaneous firing (beginning at Nav-CLS[0.3] = 24.5 mV for SM-CD) with plots values time averaged (integrated for ≥100 s). Computations beyond Nav-CLS[0.3] = 20 mV were done at x axis values (in mV) 21, 22, 23, 23.5, 24.5, 25, 26, 27, 28, 29, 29.5, and 30. ii illustrates, for SM-CD, low-frequency firing (e.g., <2 Hz, Nav-CLS[0.3] = 25 mV) through to burst firing (e.g., Nav-CLS[0.3] = 28.5 mV). Sustained firing at 28 mV elevates [Na+]i only to ∼6 mM. The Vm plot’s most hyperpolarized point (for Nav-CLS[0.3] = 29 mV) occurs where spontaneous AP bursts fire from a baseline hyperpolarized by the Na+-stimulated INaKpump. Across the range 25.0–29 mV, the Nav-CLS[0.3] damage acts as a (pathological) Nav-based pacemaker conductance in a cell that should be quiescent. Then precipitously beyond Nav-CLS[0.3] = 29 mV, the damage-induced INav would be lethal with the onset of cytotoxic swelling (i.e., [Na+ + Cl− + H2O] loading). Beyond 29 mV, hyperpolarizing INaKpump (100% pump strength notwithstanding) is insufficient to redress the depolarizing INaleak carried by the pathological operational PNa (i.e., normal PNa + left-shifted Nav channels) plus INav from the spontaneous APs.
In CN-CD, Vrest (−65.5 mV) is close to firing threshold. Hypersensitivity (sloped line, top) is the only marked Nav-CLS pathology in CN-CD until, at Nav-CLS[0.3] = 9 mV, the shifted window conductance triggers spontaneous firing (not shown). By Nav-CLS[0.3] = 10 mV, spontaneous AP Na+ influx is overwhelming; CN-CD is cytotoxically swollen (off scale for the plots).
Though SM-CD Nav density is 3× higher, its hyperpolarized Vrest (−86 mV) protects against Nav-CLS[0.3]. SM-CD too exhibits ever-increasing hypersensitivity (top) as Nav-CLS intensity increases, but at, say, 10 mV, the Nav-CLS[0.3] has no other impact. At 20 mV, Vrest is depolarized almost imperceptibly. Beyond 23 mV, this steepens sharply. See Fig. 10 legend for details.
The SM-CD Nav-CLS damage range between zero Na+ loading and the onset of highly problematic sustained spontaneous firing (see [Na+]i panel, Fig. 10 B, i) is exquisitely narrow. Thus, Nav-CLS alone (i.e., in a full pump-strength system) could not explain chronic Na+ overload in DMD fibers.
Damage-induced hypersensitivity of Fig. 10 B, i (top), would promote unwanted spontaneous APs. This could be why the single-fiber electromyographic recordings of advanced-stage DMD patients (whose fibers would certainly not be at full pump strength) show “bizarre repetitive discharge bursts” (Trontelj and Stålberg, 1983; see also Yu et al., 2012). Nav-CLS would foster, too, the in situ erratic spontaneous firing and contractility reported for DMD patients (Ishpekova et al., 1999; Emeryk-Szajewska and Kopeć, 2008; Nojszewska et al., 2017); electromyography of mdx muscle shows abnormal spontaneous potentials and complex repetitive discharges like those of boys with DMD (Carter et al., 1992; Han et al., 2006).
Depolarization and Na+ loading due to leaky cation channels
Stretch injury to healthy (McBride et al., 2000) and mdx fibers causes sustained depolarization (Baumann et al., 2020). Channels rendered hypermechanosensitive by membrane damage (e.g., Wan et al., 1999) might intermittently activate in mdx fibers (Lansman 2015), or normally quiescent cation channels might activate chronically in damaged sarcolemma. Fig. 11 shows what damage-induced chronic activation of sarcolemmal cation channels would contribute to such situations. In SM-CD and LA-CD (and counterfactual WD-CD), normally quiescent cation channels are activated. Systems converge on their membrane-damaged steady states by ∼20 min off trajectories (after 20 min) mimic step-application of a cation channel–specific inhibitor.
Leaky cation channels. For three minimal P-L/D models (Donnan dominated SM-CD and LA-CD, as well as counterfactual Pump-Leak dominated WD-CD), P-L/D trajectories after a step-activation, then 20 min later, a step-deactivation of cation channels. In all models, Vrest = ECl, and Vrest is close to EK but far from ENa. Fast depolarizing/hyperpolarizing Vm excursions thus mostly reflect the instantaneous onset/offset of an inward INaleak. Slower changes reflect ion homeostasis, i.e., active (see ATP consumption, which is directly proportional to INaKpump, which at steady state, = −INaleakTOTAL) and concurrent passive feedbacks (see Cl− and Volcell) as the P-L/D systems converge to new steady states. Volcell(t) changes at the speed of the rate-limiting osmotic flux component; in WD-CD, [small PCl] makes swelling slower than in the two [big PCl] models, SM-CD and LA-CD. WD-CD is neuron-like in that its [small PCl] serves as an osmotic damper for transient Na+ influxes (whose full metabolic cost must, however, be paid). In LA-CD, lower pump strength slows the attainment of the new steady state (compare [K+]i and [Na+]i trajectories for SM-CD and LA-CD). Discernible in various trajectories are small single oscillations; these are Donnan bounce manifestations (constrained by [A−]i(t)). To estimate concurrent Ca2+ influx through nonselective cation channels like those modeled here, see Fucile (2004).
Leaky cation channels. For three minimal P-L/D models (Donnan dominated SM-CD and LA-CD, as well as counterfactual Pump-Leak dominated WD-CD), P-L/D trajectories after a step-activation, then 20 min later, a step-deactivation of cation channels. In all models, Vrest = ECl, and Vrest is close to EK but far from ENa. Fast depolarizing/hyperpolarizing Vm excursions thus mostly reflect the instantaneous onset/offset of an inward INaleak. Slower changes reflect ion homeostasis, i.e., active (see ATP consumption, which is directly proportional to INaKpump, which at steady state, = −INaleakTOTAL) and concurrent passive feedbacks (see Cl− and Volcell) as the P-L/D systems converge to new steady states. Volcell(t) changes at the speed of the rate-limiting osmotic flux component; in WD-CD, [small PCl] makes swelling slower than in the two [big PCl] models, SM-CD and LA-CD. WD-CD is neuron-like in that its [small PCl] serves as an osmotic damper for transient Na+ influxes (whose full metabolic cost must, however, be paid). In LA-CD, lower pump strength slows the attainment of the new steady state (compare [K+]i and [Na+]i trajectories for SM-CD and LA-CD). Discernible in various trajectories are small single oscillations; these are Donnan bounce manifestations (constrained by [A−]i(t)). To estimate concurrent Ca2+ influx through nonselective cation channels like those modeled here, see Fucile (2004).
Leak amplitude for the PK:PNa = 1.11:1 cation channel is established by making its PNa = 0.3 µm3/s. For SM-CD and LA-CD, this doubles operational PNa. WD-CD’s larger resting PK and PNa values diminish the cation leak’s relative impact. ATP consumption rises almost identically in each system, but for already high-cost Pump-Leak dominated WD-CD, the rise is ∼22%, while for Donnan dominated SM-CD and LA-CD, this cation leak nearly doubles the cost of steady state.
SM-CD depolarizes by 10 mV (Vrest, green square); pathophysiologically, 10 mV is consequential (↑system excitability), but the attendant <1 mM Na+ loading (green asterisk) would hardly register. Low–pump-strength LA-CD depolarizes by 12 mV, and its [Na+]i (∼12 mM) is measurably >3.7 mM (the healthy control value for a [LA-CD/leaky] versus [SM-CD/no leak] comparison). The elevated [LA-CD/leaky] Na+ influx is countered by almost-equal K+ loss; accordingly, net [Na+ + Cl− + H2O] uptake (= osmotic Na+ loading) would give a mere 2% cellular edema (above the [SM-CD/no leak] control). A [LA-CD/leaky] scenario could, therefore, explain depolarized Na+-overloaded mdx fibers (see Table 1, items 2, 3, 4, 7, and 8) and would be consistent with DMD patients’ chronic nonosmotic [Na+]i overload.
Its elevated ATP consumption (arrow; 90 amol/s) notwithstanding, depolarized [SM-CD/leaky] still has a robust 6.6-fold pump reserve (= 566 amol/s / 90 amol/s). [LA-CD/leaky], however, has only a 1.9-fold pump reserve (= 30% × 566 amol/s/90 amol/s). While undesirable, 1.9 puts [LA-CD/leaky] in league (regarding vulnerability and robustness) with healthy CNs (pump reserve = 2.1-fold for CN-CD). In advanced DMD, where functional ischemia could initiate ischemic rundowns, leaky cation channels would speed rundown (↑INaleak) and compromise recovery (↑INaleak→↓pump reserve).
In summary, in a 100% pump-strength system, leaky cation channels, though strongly depolarizing, augment [Na+]i too little to be a plausible standalone explanation for DMD fibers’ chronic Na+ overload. In conjunction with low SMF pump strength, however, they would contribute to chronic nonosmotic Na+ overloads and amplify the loss of ion homeostatic robustness.
Low pump strength + repetitive stimulation + two damage-related Na+ leaks
Like rat soleus fibers, SM-CD briskly returns to steady state after firing 1,200 APs (Fig. 5); Fig. 12 A shows LA-CD handling this same stress test, albeit with a slower recovery. [LA-CD/leaky] (as per Fig. 11) also manages the stress test (not shown), as does [LA-CD/(Nav-CLS[0.3] = 10 mV)] (not shown). But, as Fig. 12 B, i, shows, the multiply damaged (i.e., [LA-CD/leaky/(Nav-CLS[0.3] = 10 mV)]) stress-tested Donnan dominated P-L/D system is overwhelmed. Having stabilized at a depolarized Vrest (−74 mV), it seems to handle the 1,200 APs, but at 10 s, when stimulation stops (expanded, Fig. 12 B, ii), the Vm(t) trajectory reveals that all is not well. It does not return to steady state. For ∼60 s, APs (∼20 Hz) of diminishing amplitude fire spontaneously: then the system converges on a pathological depolarized steady state that (not shown) is swollen and gradient depleted. From the limited perspective of Vm(t), it is unclear when, during the stress test, a lethal threshold was crossed. In this lethal bistability scenario, to know when threshold crossing occurred would require simultaneous monitoring of (A) INaKpump and (B) total depolarizing INaleak. Lethal threshold crossing occurs when B > A.
Stress-testing low–pump-strength LA-CD without/with leaky channels. (A) Vm(t) for LA-CD before/during/after the stress test of Fig. 5. (B i) Vm(t) for LA-CD with bleb damage (i.e., Na+ leaks through both Nav and cation channels, as described in the text) before/during/after the same stress test. (B ii) expanded Vm(t) traces as the stress test ends at 10 s, to show the transition from stimulated (120 Hz) to spontaneous APs (after about a minute Vm(t) becomes quiescent and depolarizes to the damaged system’s pathological steady state).
Stress-testing low–pump-strength LA-CD without/with leaky channels. (A) Vm(t) for LA-CD before/during/after the stress test of Fig. 5. (B i) Vm(t) for LA-CD with bleb damage (i.e., Na+ leaks through both Nav and cation channels, as described in the text) before/during/after the same stress test. (B ii) expanded Vm(t) traces as the stress test ends at 10 s, to show the transition from stimulated (120 Hz) to spontaneous APs (after about a minute Vm(t) becomes quiescent and depolarizes to the damaged system’s pathological steady state).
Na+ overload and DMD ion homeostatic jeopardy
23Na-proton-MRI (Gerhalter et al., 2017, 2019) will increasingly be used to noninvasively monitor DMD patients. Representing worsening DMD severity, Fig. 13 A thus plots SM-CD Na+ loads corresponding to diminishing pump strength and accumulating (damage-induced) Nav-CLS. The y axis indicates the lowest pump strength able to prevent spontaneous firing at Nav-CLS[0.3] intensity on the x axis. Fig. 13 B extracts values from Fig. 13 A to graphically emphasize tolerable and intolerable [Na+]i zones. Coordinates corresponding to a quiescent Vm (no spontaneous firing, so no contracture and no cytotoxic swelling) are deemed safe. Beyond that, coordinates are deemed lethal. The Volcell plot (inset in Fig. 13 A) shows safe zone swelling to be negligible. Fig. 13 C is a sketched (no further computations) reminder that leaky cation channels will diminish the safe [Na+]i zone, pulling it nearer the origin (green dot).
Safe Na+ overloads and DMD. As explained in the text, SM-CD steady-state values under the plotted conditions. (A) The master plot (calculated at 2.5 mV x axis intervals up to 22.5 mV Nav-CLS[0.3], then at 24 mV and 24.3 mV. (B) Derived from A, and C is sketched from B (no additional computations) as labeled, to visually illustrate the point made in the box.
Safe Na+ overloads and DMD. As explained in the text, SM-CD steady-state values under the plotted conditions. (A) The master plot (calculated at 2.5 mV x axis intervals up to 22.5 mV Nav-CLS[0.3], then at 24 mV and 24.3 mV. (B) Derived from A, and C is sketched from B (no additional computations) as labeled, to visually illustrate the point made in the box.
An overall message: for damaged SMFs, there is no one canonical safe [Na+]i-load value. As per Fig. 13 A, for SM-CD pump strengths approaching the saddle-node value (Fig. 9), high [Na+]i can be sustained, but only if there is no damage–Na+ leak. At the other extreme (near 100% pump strength), profound membrane-damage Na+ leak is tolerated with almost no Na+ loading, but any pump-strength reduction would bring on lethal spontaneous APs. Between these extremes, chronic [Na+]i overloads beneath the descending Na+ line, though undesirable, are tenable. Quiescent fibers close to the safe boundary would have little resilience: transient physiological demands on the P-L/D system (AP trains, use of secondary transporters, a bout of functional ischemia) could push them into the lethal zone.
DMD-patient muscle [Na+]i values assessed by 23Na-MRI would combine individual fibers with coordinates throughout the safe zone. Safe-zone fibers well to the right would be mildly [Na+]i loaded but hyperexcitable and thus vulnerable to unwanted (and lethal) excitation–contraction coupling (Claflin and Brooks, 2008). At left (Fig. 13 B), in heavily [Na+]i-loaded safe-zone fibers, vulnerability to Ca2+ necrosis via reverse operation of Na+/Ca2+ exchangers (as per Burr et al., 2014) would be an ever-present danger. Ca2+ necrosis and ion homeostatic failure are not mutually exclusive explanations for DMD fiber demise.
Discussion
To address the impaired ion homeostasis of Duchenne MD, a generic ion homeostasis model for excitable SMFs, SM-CD, was devised, then tested under normal and DMD-like conditions. For SMFs, myonuclear domain size is the average cyto-volume transcriptionally served by one nucleus in the syncytium. SM-CD does not represent the syncytial SMF; it is one ion homeostatic unit that, disposed as many contiguous slices, would represent a syncytial SMF. Back-calculating from mice (e.g., Mantilla et al., 2008), SM-CDs’ 2,000 µm3 would roughly correspond to one myonuclear domain volume. Cell biologically, this is reasonable because SM-CDs’ 2,000 µm3 matches CN-CDs’ one neuronuclear domain.
SM-CD and CN-CD are excitable P-L/D systems. SMFs’ and neurons’ distinctive ion homeostatic P-L/D strategies have been evolutionarily tuned to their distinctive electrophysiological lifestyles: mostly quiescent, low excitability, and resilient during severe ion homeostatic emergencies (syncytial SMFs) and electrically agile, electrically versatile, highly excitable (neurons). SMFs’ low-impedance Donnan-dominated steady state is robust and inexpensive. Neurons’ high impedance Pump-Leak–dominated steady state is vulnerable and expensive. In ancestral (like modern) vertebrates, SM occupied the largest fractional tissue mass (Mink et al., 1981; Rolfe and Brown, 1997; Helfman et al., 2009; Johnston et al., 2011; Casane and Laurenti, 2013; Dutel et al., 2019; see Table S1); a low-cost steady state for this massive tissue is self-evidently advantageous. Neurons’ executive functions are indispensable for the whole organism; that, plus their small fractional body mass (<0.2% in ancestral vertebrates, ∼2% in humans), has, self-evidently, rendered their precariously costly ion homeostasis acceptable.
DMD ion homeostasis is simulated here as reduced pump strength and/or inappropriately active Na+-permeant ion channels. Ca2+ necrosis, considered the usual proximate cause for fiber loss in DMD, is indirectly addressed. Beyond DMD, pathological situations modeled here are relevant to healthy SMFs that experience traumatic/exercise injury, including situations arising as compartment syndrome.
Prospects
DMD molecular-therapy preclinical and clinical trials are in progress (Verhaart and Aartsma-Rus, 2019; Meng et al., 2020; Datta and Ghosh, 2020; Chemello et al., 2020; Wagner et al., 2021; Duan et al., 2021), and noninvasive monitoring of aspects of muscle ion homeostasis is increasingly feasible (e.g., Dahlmann et al., 2016; Mankodi et al., 2017; Forbes et al., 2020; Pennati et al., 2020; Zhang et al., 2020; Dietz et al., 2020; Sherlock et al., 2021). The generic theoretical framework outlined here for excitable SMF ion homeostasis should prove helpful in those contexts. DMD fibers’ operational pump strength (as modeled here) depends on the diverse factors mentioned in Fig. 1 C, some of which are therapeutic targets. As pump strength diminished and as fibers accumulated sarcolemma damage in DMD, our analysis indicates that Nav1.4 channels and leaky (Na+-permeant)–cation channels would be therapeutic targets.
Generic SMF ion homeostatic theory as captured by SM-CD (as is) should help frame discussion of (for example) fiber-type–specific single-fiber “snap-freeze” proteomics (Deshmukh et al., 2021), studies of fiber-type– and exertion-regimen–specific ClC-1 immunocytochemistry (Thomassen et al., 2018), and so on. For quantitative use in connection with data obtained, for example, by simultaneous monitoring of multiple SMF ions (Heiny et al., 2019; DiFranco et al., 2019), SM-CD needs to be up-graded (e.g., SMF appropriate V-gated channel kinetics and SMF-specific pumps; for the DMD context, this would extend to the different kinetic to diaphragm and postural muscle pump isoforms; Kravtsova et al., 2020; also see supplemental text).
Fig. 14, left, summarizes the “as-is machinery” of SM-CD, and at right, suggests what a next-stage generic SMF model could incorporate. The following section itemizes what as-is SM-CD reveals about how SMF ion homeostasis copes as well as it does under DMD conditions, and also how it would eventually fail.
SM-CD as is and next-stage SM-CD. Left: SM-CD as is plus conductance (i.e., permeability) modifications for the DMD situation (Nav-CLS and the leaky cation channels). DMD problems that diminish operational pump strength (Fig. 1 C) are modeled simply via ↓maximal pump strength (Fig. 4 B, i). Right (amplified in the supplemental text): Features to consider for future SM-CD iterations. Not indicated pictorially: in lieu of generic (H-H) voltage-gated channels, Nav1.4 and SMF-appropriate Kv channel kinetics could be substituted. (A) PNa: of unknown molecular identity; healthy SMFs presumably coregulate PNa relative to PK to set Vrest (Fig 4 D). How such regulation occurs cannot be investigated until PNa is identified. (B) PK: two boxes depict generic I-V relations for inwardly rectifying K currents. B i shows strongly inwardly rectifying IK(V) for two different [K+]e:[K+]i ratios (illustrating that inward IK increases and its zero-current potential depolarizes as [K+]e increases); for an SMF example, see DiFranco et al. (2015). B ii depicts a weakly inwardly rectifying IK; for examples, see Bollensdorff et al., 2004 and Scott et al., 2016. (C) PCl: mostly due to ClC-1, a channel expressed exclusively in SMFs. CIC-1 has a weakly voltage-dependent open probability and undergoes a hyperpolarizing shift upon energy depeletion (Leermakers et al. 2020). (D) 3Na+/2K+-ATPase pumps: in future generic iterations of SM-CD, Eq. 10 variables should be made typical of well-characterized α-isozyme profiles for fast or for slow fibers, and could be further tuned to reflect particular developmental, disease, or work-regimen conditions (Kravtsova et al., 2016; Kravtsova et al., 2020; Deshmukh et al., 2021). Add ons to the appropriately reparameterized Eq. 10 could be used to approximate aspects of feed-forward signaling (e.g., AChR→α2-isoform; Heiny et al., 2010). (E) Depiction of how activating a Na-K-2Cl cotransporter would depolarize and swell SMFs due to electroneutral dissipation of Na+ and K+ gradients plus Cl− uptake; the responses depicted are consistent with computations by Fraser and Huang (2004). A pathologically overactive Na-K-2Cl would foster osmotic Na+ overloads, not the chronic nonosmotic Na+ overloads reported for DMD (Gerhalter et al., 2019). (F) SMFs can intermittently call on multiple other ENa-depleting cotransporters (Usher-Smith et al., 2009). (G) T-tubules (the focus of P-L/D modeling by Fraser et al. [2011] and by Sim and Fraser [2014]). (H) Cation channels (Metzger et al. [2020] includes a brief review for SMFs). As discussed here, SMF PNa might be a cation channel (see, too, Yeung et al., 2003). (I) A finite extracellular volume (to model K+ loading that affects pumping kinetics, inward rectifier fluxes, and for some cotransporters, including pH regulators). A pump equation with the requisite additional parameters would be needed here.
SM-CD as is and next-stage SM-CD. Left: SM-CD as is plus conductance (i.e., permeability) modifications for the DMD situation (Nav-CLS and the leaky cation channels). DMD problems that diminish operational pump strength (Fig. 1 C) are modeled simply via ↓maximal pump strength (Fig. 4 B, i). Right (amplified in the supplemental text): Features to consider for future SM-CD iterations. Not indicated pictorially: in lieu of generic (H-H) voltage-gated channels, Nav1.4 and SMF-appropriate Kv channel kinetics could be substituted. (A) PNa: of unknown molecular identity; healthy SMFs presumably coregulate PNa relative to PK to set Vrest (Fig 4 D). How such regulation occurs cannot be investigated until PNa is identified. (B) PK: two boxes depict generic I-V relations for inwardly rectifying K currents. B i shows strongly inwardly rectifying IK(V) for two different [K+]e:[K+]i ratios (illustrating that inward IK increases and its zero-current potential depolarizes as [K+]e increases); for an SMF example, see DiFranco et al. (2015). B ii depicts a weakly inwardly rectifying IK; for examples, see Bollensdorff et al., 2004 and Scott et al., 2016. (C) PCl: mostly due to ClC-1, a channel expressed exclusively in SMFs. CIC-1 has a weakly voltage-dependent open probability and undergoes a hyperpolarizing shift upon energy depeletion (Leermakers et al. 2020). (D) 3Na+/2K+-ATPase pumps: in future generic iterations of SM-CD, Eq. 10 variables should be made typical of well-characterized α-isozyme profiles for fast or for slow fibers, and could be further tuned to reflect particular developmental, disease, or work-regimen conditions (Kravtsova et al., 2016; Kravtsova et al., 2020; Deshmukh et al., 2021). Add ons to the appropriately reparameterized Eq. 10 could be used to approximate aspects of feed-forward signaling (e.g., AChR→α2-isoform; Heiny et al., 2010). (E) Depiction of how activating a Na-K-2Cl cotransporter would depolarize and swell SMFs due to electroneutral dissipation of Na+ and K+ gradients plus Cl− uptake; the responses depicted are consistent with computations by Fraser and Huang (2004). A pathologically overactive Na-K-2Cl would foster osmotic Na+ overloads, not the chronic nonosmotic Na+ overloads reported for DMD (Gerhalter et al., 2019). (F) SMFs can intermittently call on multiple other ENa-depleting cotransporters (Usher-Smith et al., 2009). (G) T-tubules (the focus of P-L/D modeling by Fraser et al. [2011] and by Sim and Fraser [2014]). (H) Cation channels (Metzger et al. [2020] includes a brief review for SMFs). As discussed here, SMF PNa might be a cation channel (see, too, Yeung et al., 2003). (I) A finite extracellular volume (to model K+ loading that affects pumping kinetics, inward rectifier fluxes, and for some cotransporters, including pH regulators). A pump equation with the requisite additional parameters would be needed here.
DMD-related SMF ion homeostasis as seen via the [big PCl][small INaleak] model, SM-CD
Chronic low–pump strength
Chronic low–pump strength is tolerated because [small INaleak] → a small requirement for ATP-generated INaKpump at steady state. Thus, even at chronically low pump strengths (say, 30% LA-CD; Table 2), enough pump reserve can remain to handle moderate ionic perturbations (Fig. 7 C, iii; Fig. 11; and Fig. 12 A).
DMD functional ischemia
Transiently, DMD functional ischemia could take already low pump-strength fibers deep into the danger zone (Fig. 9 C). Longer term, the attendant membrane damage could ↑INaleak and ↓pump strength. A bout of functional ischemia to below a fiber’s saddle node would initiate ischemic rundown; the weaker the pump strength and the larger the INaleak, the faster the rundown (Fig. 6 C, inset plot). However, if that bout ended before spontaneous firing commenced (Fig. 7 C, iii), even pump strength–boosting factors as minor as massage for circulatory improvement (Carroll et al., 2020) will contribute measurably to DMD fiber survival (Fig. 9 C).
Even at ultra-low pump strength, Na+ loading is mostly nonosmotic
Fig. 9 shows how, even at the saddle node (X), with [Na+] loading massive, with [small INaleak] there contaminated by Nav window current, operational INaleak has remained small enough that Volcell has increased only a few percent. Hammon et al. (2015) show that during anaerobic exercise, healthy SMFs exhibit a water-independent (i.e., nonosmotic) ↑[Na+]i; this seems broadly congruent with anoxic and rundown/recovery behavior for SM-CD and LA-CD (Fig. 7).
As per 23Na-proton-MRI, chronic SMF Na+ overload is nonosmotic
In SM-CD, PCl >> PK >>> PNa with Vrest = ECl. INaleak is so small that during stress testing and rundowns, electro-osmo-balance is maintained with very little [Na+ + Cl− + H2O] entry. In such situations, if spontaneous firing began (Fig. 6; and Fig. 7 A, i), the concurrence, for actual fibers, of contracture with osmotic Na+ loading would presumably destroy them. Such fibers would therefore not contribute to whole-muscle 23Na-proton-MRI signals (see Fig. 13). If SMFs’ V-gated channels were fully inactivated, osmotic Na+ loading could develop safely (see, e.g., Fig. 8 [SM*-CD] at ∼50 min: with ENa ∼0 mV (maximal Na+ loading), swelling is only (2,400/2,000) 1.2-fold (for reference, after exhaustive exercise, 1.2-fold is the upper limit for fiber swelling [Sjøgaard et al., 1985, recounted by Fraser and Huang, 2004]). H2O loading lags Na+ loading there, [big PCl] and very big [PH2O] notwithstanding. Why? Because SM*-CD is a minimal P-L/D system, so ECl tracks Vm (keeping the driving force on Cl− small; see ICl, Fig. 8). Unlike nonosmotic chronic Na+ overload in DMD, overactive Na-K-2Cl co-transport would produce osmotic Na+ loading (Fig. 14 E).
Chronic depolarization without swelling
At very low pump strengths, there is insufficient hyperpolarizing INaKpump to maintain normal Vrest (e.g., see Vm for 20% pump strength; Fig. 9 B), so (in the danger zone below ∼20% pump strength) depolarization →↑chronic Nav subthreshold activity. Danger zone depolarization and reduced ATP consumption therefore coincide, making long-term fiber viability in the danger zone improbable. More likely, chronically depolarized DMD fibers have leaky cation channels plus more mildly reduced pump strength, like LA-CD in Fig. 11, whose depolarized state recruits some subthreshold Nav activity along with the leaky cation channels. Such fibers would be Na+ loaded but barely swollen. If, additionally, there was Nav-CLS damage (Figs. 10 and 13), higher pump strengths would be required for a fiber to remain safe.
Erratic spontaneous contractility
Erratic spontaneous contractility is explicable if damaged DMD sarcolemma was hypersensitized by Nav-CLS (Fig. 10 B, i, top) and if fibers were chronically depolarized as per Chronic depolarization without swelling. Transient cation channel leaks could then trigger spontaneous AP bursts (i.e., not attributed to end plate input). Though unwanted contractile events are undesirable, brief episodes as just described would be manageable, ion homeostatically, for chronically low pump-strength fibers still tolerably far from a saddle node (X).
Low tolerance for sustained exertion
During exertion, fiber ATP is needed for both contractile and ion homeostatic processes. DMD’s functional ischemia occurs for lack of the healthy fiber vasodilation that keeps operational pump strength safely high during exertion (Fig. 9 C).
SMF circadian rhythms could imperil already-compromised DMD respiratory muscles
DMD patients minimize daytime muscle exertion, but nights too are problematic. During rapid eye movement sleep, respiratory profiles are acutely compromised (Nozoe et al., 2015; Hartman et al., 2020; MacKintosh et al., 2020). Muscle tissue sleep rhythms diminish SMF glucose availability and oxidative capacity (Harfmann et al., 2015; van Moorsel et al., 2016; Ehlen et al., 2017); the reduced pump strength could take DMD diaphragm and thoracic fibers to their lethal saddle nodes (Fig. 9 C).
Safe Na+ overload: What can be deemed safe varies with the mix of deficits
Due to DMD membrane damage, Nav channels may have Nav-CLS of unknown intensity. Thus, no one Na+-overload level can reliably be designated safe (Fig. 13). The paucity of human SMF data (plus its disparity with respect to mouse data; Table 1) make it hard to assess the [Na+]i values of Fig. 13, as does the fact that SM-CD pump kinetics are not those of human (or mouse) SMF pumps (Fig. 14). Anecdotally, Dahlmann et al. (2016) used 23Na-MRI to monitor a young athlete’s muscle injury and recovery (control – the noninjured contralateral); this showed at 0, 2, and 8 wk ([Na+]i in mM), control/injured, 18/44, 19/38, and 19/22, respectively. By comparison (as per Table 1), control/DMD readings are ([Na+]i in mM) 25/38 (Weber et al., 2011) and 16/26 (Gerhalter et al., 2019). The global point of Fig. 13 is that nonlinear interplays among pump strength, Vrest, Nav window current, and damage-induced ↑PNa (from Nav-CLS and leaky cation channels) diminish safe Na+-overload levels nonlinearly. The down-sloping Na+ line (Fig. 13, B and C) implies that while, say, 80 mM would be safe if the sole DMD deficit is low pump strength, 30 mM could be lethal if there was also, say, ∼20 mV of Nav-CLS[0.3]. If, during tissue remodeling of damaged depolarized SMFs, Nav channels were to chronically slow inactivate (Webb et al., 2009), safety would increase (Fig. 8).
Ca2+ necrosis: An elusive consequence of failed ion homeostasis
Here, for low pump-strength systems, Ca2+ necrosis can be taken as implied by the onset of spontaneous firing (→Ca2+-mediated excitation–contraction coupling; in ATP-depleted fibers, contraction would be irreversible). Rundowns (Figs. 6 and 7) elicit such firing. Physiological ENa depletion from AP trains (Fig. 12 B) or, say, an intense bout of cotransporter activity (see Fig. 14 E) could take DMD fibers already coping with insult/injury to a saddle-node threshold (thence to Ca2+ necrosis). Conditions for fiber demise are thus diverse. Moreover, though the criterion for the onset of lethal spontaneous firing is simple, hyperpolarizing INaKpump < depolarizing INaleak(total), knowing that a threshold has been crossed can be elusive. Even computationally, with multiple nonlinear factors affecting Na+ fluxes (as per Safe Na+ overload), recognizing threshold crossing is tricky in the time domain. Depending on the initial conditions before injured SM-CD encountering an unstable threshold (in parameter space), irreversible crossing could happen within milliseconds or might take hours. Consider Fig. 6 (a tourniquet, say, applied at t = 0 to a healthy fiber): this system is now destabilized, but an observer monitoring Vm(t) between, say, 300–320 min would likely report a seriously depolarized but stable Vrest. Consider Fig. 12 B: during the stress test, though Vm(t) seems unproblematic, during those 1,200 Aps, the system destabilizes. Recordings that report on SMF [Ca2+]i(t) are typically visually striking, and they are more easily accomplished recordings of [Na+]i(t) or even Vm(t). Instances of fiber loss reported as Ca2+ necrosis could therefore reflect ion homeostatic failure. Advances in cell physiological instrumentation could enhance P-L/D investigations of SMFs in the DMD context: it is now possible, with a four-electrode method (Heiny et al., 2019), to follow multi-ion dynamics and transport processes under voltage or current clamp, even monitoring [Cl−]i accurately (DiFranco et al., 2019).
Therapeutics and optimizing the P-L/D process in DMD SMFs
Diminishing DMD fiber loss by bolstering SMFs’ ion homeostasis robustness (i.e., moving as close as possible to the green dots of Figs. 9, 10, and 13) would require (1) optimizing operational pump strength by countering the factors listed in Fig. 1 C, and (2) minimizing Na+ leaks. Examples for (1) are up-regulating pumps and/or modifying their kinetics (Breitenbach et al., 2016; Glemser et al., 2017; Raman et al., 2017), ↑vascular sufficiency (e.g., angiogenesis; Verma et al., 2019; Podkalicka et al., 2019), dietary supplementation that increases vascular density (Banfi et al., 2018), ↑vasodilation (e.g., NO reagents; Rebolledo et al., 2016; Patel et al., 2018), and massage (Saxena et al., 2013; Carroll et al., 2020). Insofar as stressors (e.g., during ischemic preconditioning; Rongen et al., 2002) cause myofibers to preemptively up-regulate their pump strength (↑pump reserve), encouraging this (Glemser et al., 2017) could help prevent threshold catastrophes. Examples for (2) are suppression of the danger zone’s treacherous subthreshold Nav1.4 current, e.g., via ranolazine and/or anticonvulsant agents that enhance Nav1.4 slow inactivation in SMFs (Lorusso et al., 2019; Skov et al., 2017), neither of which is (yet) in use for DMD. Long-available pharmacological tools could establish whether leaky AChR channels (Carlson and Officer 1996; Pan et al., 2012) contribute to DMD fiber depolarization/Na+ loading.
Sarcolemmal damage causes Na+ loading via Na+-permeant (tetrodotoxin-insensitive) channels (Yeung et al., 2003) thought to be the overactive (and adventitiously mechanosensitive) cation channels of mdx fibers (Yeung et al., 2005; Ward et al., 2018). The scenario resembles LA-CD/leaky (Fig. 11). In healthy SMFs, does that cation channel do for SMFs what NALCNs do for neurons and smooth muscle (Lutas et al., 2016; Philippart and Khaliq, 2018)? In other words, is it SMFs’ physiological PNa? Perhaps the membrane-active compounds coming into use for DMD patients (Houang et al., 2018; Sreetama et al., 2018; Conklin et al., 2018) will stabilize a leaky SMF PNa, but with SMF PNa unidentified, this would be difficult to test. SMF’s small-valued PNa has been overlooked but, as emphasized here, its smallness makes it powerful, not trivial. That smallness is an energetically pivotal feature of the human body’s largest tissue. Like the process underway for its neuronal counterpart (NALCN, e.g., Kang et al., 2020) molecular identification and structural characterization of SMF PNa would open routes to rational development of inhibitors and modulators.
Acknowledgments
Jeanne M. Nerbonne served as editor.
We acknowledge financial support from Natural Sciences and Engineering Council (Canada; grant RGPIN-06835-2018 to B. Joos) and support from the Ottawa Hospital Research Institute (to C.E. Morris).
The authors declare no competing financial interests.
Author contributions: C.E. Morris: conceptualization, model validation, figure preparation, and manuscript writing and revising; B Joos: conceptualization, model development, coding, optimizing, and validating the charge difference approach computational models, implementing the models and curating the outputs, writing Materials and methods, and manuscript editing; and J.J. Wheeler: contributing to coding and data presentation.