Table 1.

Summary of clathrin coat growth model fits in SK-MEL-2.

Curvature H(θ)Surface area A(θ)Edge length Ɛ(θ)Projected area Ap(θ)
CAM A 58,300 ± 400 nm2 56,600 ± 400 nm2 49,400 ± 500 nm2 48,800 ± 500 nm2 
CCM R 94.5 ± 0.7 nm 84.8 ± 0.4 nm 97.3 ± 0.8 nm 92.8 ± 0.7 nm 
CoopCM γ (9.4 ± 0.1) 10-3 nm−1 (9.0 ± 0.1) 10-3 nm−1 (9.4 ± 0.1) 10−3 nm−1 (9.1 ± 0.1) 10−3 nm−1 
H0 (13.9 ± 0.1) 10−3 nm−1 (13.8 ± 0.1) 10−3 nm−1 (13.4 ± 0.1) 10−3 nm−1 (13.6 ± 0.1) 10−3 nm−1 
R0 72.0 ± 0.6 nm 72.2 ± 0.6 nm 74 ± 0.8 nm 73.4 ± 0.9 nm 
A0 0.51 0.55 0.49 0.52 
kon 78.1 nms˜−1 72.2 nms˜−1 83.4 nms˜−1 78 nms˜−1 
Curvature H(θ)Surface area A(θ)Edge length Ɛ(θ)Projected area Ap(θ)
CAM A 58,300 ± 400 nm2 56,600 ± 400 nm2 49,400 ± 500 nm2 48,800 ± 500 nm2 
CCM R 94.5 ± 0.7 nm 84.8 ± 0.4 nm 97.3 ± 0.8 nm 92.8 ± 0.7 nm 
CoopCM γ (9.4 ± 0.1) 10-3 nm−1 (9.0 ± 0.1) 10-3 nm−1 (9.4 ± 0.1) 10−3 nm−1 (9.1 ± 0.1) 10−3 nm−1 
H0 (13.9 ± 0.1) 10−3 nm−1 (13.8 ± 0.1) 10−3 nm−1 (13.4 ± 0.1) 10−3 nm−1 (13.6 ± 0.1) 10−3 nm−1 
R0 72.0 ± 0.6 nm 72.2 ± 0.6 nm 74 ± 0.8 nm 73.4 ± 0.9 nm 
A0 0.51 0.55 0.49 0.52 
kon 78.1 nms˜−1 72.2 nms˜−1 83.4 nms˜−1 78 nms˜−1 

Fitted parameter values for the constant area model (CAM), the constant curvature model (CCM) and the cooperative curvature model (CoopCM) when fitting curvature H(θ), surface area A(θ), edge length Ɛ(θ), and projected area Ap(θ). A: Surface area fitted with CAM; R: Radius fitted with CCM; γ: Constant rate of curvature increase fitted with CoopCM; H0: Preferred curvature of the clathrin coat fitted with CoopCM; R0: preferred radius of the clathrin coat fitted with CoopCM; A0: Fraction of surface area growing as a flat lattice before curvature initiation, defined as A0 = A(θ = 0.01)/A(θ = 180°); kon: local growth rate obtained from θ(t) fitted with CoopCM and measured in nm per pseudotime units s˜-1. N = 13 cells; n = 1,645 sites.

or Create an Account

Close Modal
Close Modal